Questions & Answers for: Mitsubishi WD 2 blinks

...menu and device/input buttons both in together for 5 seconds then the led will blink a number of blinks pause then blink another number of blinks then repeat that process. Let me know thw binks

...device buttons on the front panel. then counting the number of blink. It should blink a series of blinks and pause for the first digit then blink another series and pause for the second digit .

green status light will not stop blinking. did green status light will not stop blinking. did system reset, still blinks, pauses, blinks sounds like bad lamp hope this helps out

...like 5 times.  That would be a code of 35.  It may blink one time long, then two short blinks.  That is not a code blink but indicates another problem.  Do a search for the ...

replaced lamp but lamp light still blinks orange I have a wd-57731 and the picture disappeared bu there was still sound. The lamp light blinked orange. i replaced the lamp turned the tv on and the ...

...13 on mitsubishi wd52628 tv will not power on. no red or yellow status light. Status light green, blinks rapidly, then blinks 1 time followed by 3 blinks. wait for the light to go out then press ...

...worked all day. today when i repeated the process it went right back off and blinked red or it just blinks red until you unplug it Try removing the projection lamp and reinstalling it. After you ...

Mitsubishi WD-57733 timmer light blinks then lamp light blinks Timer light blinks maybe twice then lamp light blinks serveral times, tv won't power on. Could it just need a bulb replaced? Yes. It is ...

mitsubishi dlp wd y65 orange light blinks These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit

my tv blinks 6x red and 1x yellow. whats that mean? Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the ...