Questions & Answers for: Westell Wirespeed 2 blinking light

light is blinking I have a Westell 6100 and my ethernet light started blinking recently. I cannot seem to connect to the internet nor can I get to my email server. Why would this light be blinking and

light on the modem is blinking or flashing, then you do not need to worry. the Ethernet light and the internnet light on the modem will always blink, but the dsl and the power lights shud not blink...

...light is blinking. The internet light is a solid red. I tested the connection on my 360 and it said I was connected to the network, but it couldn't connect to the internet. What's the dealio? hi ...

Blinking light on Westell 6100 DSL modem The USB light on the front of my Verizon Westell 6100 DSL modem recently began blinking 24 hours a day, roughly once a second. What might be causing that? It's

Blinking light on Westell 6100 DSL modem The USB light on the front of my Verizon Westell 6100 DSL modem recently began blinking 24 hours a day, roughly once a second. What might be causing that? It's

...light is blinking then the router is Synchronising with the line card at the ISP/exchange end. If it continues to blink then no sync is occurring. If ADSL replace the microfilter and check that any ...

data light on westell 6100g modem blinks all th time The data light on our 6100g westell modem blinks all the time even when the computer is turned off. The other 2 lights(internet and dls) do not ...

...for 1 minute then switch on the router/modem wait for all light to come back-switch on the pc..if intermet light is blinking there might be an issue at the ISP's end. Http://www.ikarmatech.com

...light Data is blinking green DSL is blinking green If the internet light is red, it means that the modem cannot get an ip connection from the ISP. If your ISP has a PPPOE connection, most likely, the ...

...light blinking? because, it is just normal for the E1 light to blink, but the DSL light should be solid at all times. It can be a possible issue with the cable or the LAN card, but you still need to ...