t-clocs what does it stand for? tires control lights oil, chassis, stands,,,
o2 sensors on subaru legacy tester said bank 1 sensor one low heater Sound like the O2's heater circuit may not be working, that will set a code. I am not a big fan of univeral O2's, too many problems
...blinking light on the dash either. I talked to an HD mechanic who tore apart the bike and said that the flasher was bad, but that they don't carry that particular type, nor do they know where to get ...
right turn signal blinks fast in rear and none in front Front bulb is burned out
Turn Signals Have a pegasus scooter the right turn signal blinks fast in rear and nothing in the front. Changed both bulbs and checked fuse still the same thing happens help Check the plug going to ...
on my way to work my qlink just stopped running? Very nice bike. Forgive me for saying, but has it definitely got gas in the tank? Run it on reserve tank if not. Check that the HT lead has not come ...
my 2007 Q link legend wont start,i turned the key on all lights flickerd and went out and now it wont do anything? sounds new enough to not have troble like this. The battery might be bad or dead or ...
Won't do anything when I press the starter thumb switch on the throttle. Replaced the ignition key switch, new battery, but nothing starts. Starter turns when I take a screwdriver and contact the two ...
all lights not working my lights were working and now they are not I would like to try to do the repairs myself Check battery, battery fuses, wire condition of the wires going from battery to the ...
Question about 2008 Legacy 250
The batter was hooked up wrong and it blew the main fuse on the starter relay solenoid. I replaced the fuse and the lights worked but still wouldn't even try to crank. So I replaced the solenoid still
Usually answered in minutes!
28 Questions
22 Questions
21 Questions
14 Questions
14 Questions