Questions & Answers for: Hyundai Elantra 2 4 crankshaft

Ad

Question about 2001 Elantra

1 Answer

...back and now she has no spark. I also need the timing formation. yes sir, check and make sure the crankshaft positioning sensor is plugged in or it may have gotten damaged when pulling the ...

Ad

...Friend Removal: Support engine: remove -engine mounting, auxiliary drive belt, water pump pulley, crankshaft pully bots & crankshaft pully, timing belt covers....turn crankshaft to TDC on No 1 ...

Ad

lantra crankshaft pulley securing screw, right or left hand thread? Crankshaft Pully Bolt - right hand threads (clockwise to tighten, counter-clockwise to loosen).

how i fix timing of lantra 1600 cc 95 Disconnect battery earth lead. Do not turn crankshaft or camshaft when timing belt removed. Remove spark plugs to ease turning engine. Turn engine in normal ...

Question about Motor 1996 Elantra

1 Answer

...timing marks aligned [6] & [7] . 1. Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket. Ensure belt is taut between sprockets. 2. Slacken tensioner pulley bolt [8] . ...

...while driving . had it towed home after a few hours of siting it started up a code did show up .crankshaft pos sensor and cylinder misfire. after a few days of driving with no problems ,then it ...

(bad fuel pump) or the fuel injectors are not firing (possible PCM or Powertrain Control Module). A crankshaft position sensor can also cause a no start condition. It is located near the Crankshaft of

...access the cover of the timing belt. Remove the timing belt cover with a socket wrench. 2. Turn the crankshaft clockwise to position the No. 1 piston at the top dead center position as indicated by ...

Question about Motor 1999 Elantra

1 Answer

...setting to restart the engine? I am not sure about restart the engine,but I would check the crankshaft sensor or the crankshaft pulley... When a crankshaft sensor has failed or is failing, ...

replacing crankshaft position sensor for hyundai elantra 1999 I replace Crankshaft position sensor with a new one, but it my car doesn't start. I put back the old one once again and it doesn,t start ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...