Questions & Answers for: Dodge Spirit 2 4 crankshaft

Ad

...chain, remove the timing chain case cover Fig. 2: When removing and installing the timing chain the crankshaft and camshaft sprocket timing marks should be aligned as shown Fig. 3: While holding the ...

Ad

I replaced the timing belt , Need to know where the mark is for cranshaft? It should be on the pulley on the end of the crankshaft, should indicate zero on the index mark on the pulley

Ad

...belt on a 1991 dodge spirit 3.0 The path of pulleys around which the belt goes (beginning with the crankshaft pulley, and moving clockwise around the array of pulleys) is in this order: tensioner ...

Question about 1991 Spirit

1 Answer

shafts also or do they reset after the belt is broken. You do need to get the cams lined up and the crankshaft at top dead center. Though, if the belt broke, you may have bent some valves because this

I would like to know where the crankshaft gasket is? I have a 1994 dodge spirit, a 6 cyl. How hard is it for me to replace the gasket? 3.3L and 3.8L Engines Raise and safely support the front of the ...

Question about 1994 Spirit

1 Answer

need to know how to remove a crankshaft to remove a timing belt. I hope that you mean remove crankshaft pulley. crankshaft removal is not part of timing belt replacement, but the pulley may be. These ...

Question about 1991 Spirit

1 Answer

...cranking (bad Hall effect) OR timing belt skipped one or more teeth; OR loss of either camshaft or crankshaft position sensor. Can cause the engine to stop working entirely with no limp-home

Question about 1991 Spirit

1 Answer

the oil level may just be too low. Other causes may be caused by worn out parts such as bearings or crankshaft journals. Check also for leaks when you park the car overnight. Put newspaper and observe

...i need to put it on top dead center how do i do that? Using a flashlight/torch, locate and view the crankshaft pulley. There will be some small marks on there, or perhaps just one. Align the first ...

...inside the engine block casting, that has several lubrication galleries running paralell to the crankshaft and the camshaft. the head has some oil passages to let the oil drain to the pan, and

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1991 Dodge Spirit
1991 Dodge Spirit

142 Questions

1993 Dodge Spirit
1993 Dodge Spirit

-50 Questions

1994 Dodge Spirit
1994 Dodge Spirit

124 Questions

1992 Dodge Spirit
1992 Dodge Spirit

-30 Questions

1990 Dodge Spirit
1990 Dodge Spirit

67 Questions

Manuals & User Guides

Loading...