Questions & Answers for: Acura 2 4 crankshaft

Ad

Question about 1990 Integra Hatchback

1 Answer

crankshaft pulley does the crankshaft pulley bolt have left handed threads? no it doesnt,to undo fit a appropiate socket and using a big knuckle bar wedged in suspension turn starter motor to undoo ...

Ad

special bolt on the crankshaft pully on 1990 acura integra im trying to replace the timing belt on my 1990 integra the break down print out says there is a special bolt holding the crankshaft what is ...

Ad

Question about 1990 Integra Hatchback

1 Answer

Trying to find out what the special bolt is on the crankshaft on my 1990 acura integra bro., what do you mean in the crankshaft? just go to pick n pull and put it in your pocket and walk out.

Question about 1990 Integra Hatchback

1 Answer

...HOT EXHAUST MANIFOLDS.START THE ENGINE POINT THE TIMING LIGHT AT THE TIMING MARK POINTER AND THE CRANKSHAFT PULLEY.ON THE 1990 - 1993 MODELS THE POINTER SHOULD BE ON THE RED MARK 16 DEGREES BTDC

where is the crank shaft sensor located on a 2006 acura tl and how do i replace it? thanx Crankshaft position sensor located on Right side of the engine. 1.remove the crankshaft pulley 2. remove the ...

1997 acura tl crankshaft spinning freely, is this normal? Just replaced a/c compressor and the pulley is turning real slow. Belt is not slipping. The crankshaft pulley and a/c pulley/belt rotate ...

Question about 1997 TL Series

1 Answer

...just enough to turn the gear that needs to be realigned. After tensioning the belt, rotate the crankshaft clockwise 720 degrees and recheck the timing marks. I have pasted the book procedure ...

Question about 1997 TL Series

1 Answer

...fans for access. Remove accessory belts. Release PS hose clamp which is also in the way. 2) Break crankshaft pulley/harmonic balancer bolt and remove pulley (inspect closely for any defects or ...

...Your rotating a helical gear Keep stabbing the dist until you get #1 in the correct place the crankshaft make 2 turns and the camshaft 1. distributor is turning with the camshaft.turn the ...

I have a 2009 Acura TSX with the code P0339 - Crankshaft Position Sensor A Circuit Intermittent. What does that mean? IT means the computer is seeing an intermittent signal from the crankshaft ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Acura TL
2000 Acura TL

413 Questions

1999 Acura TL
1999 Acura TL

404 Questions

1997 Acura CL
1997 Acura CL

407 Questions

1991 Acura Legend
1991 Acura Legend

282 Questions

Top Acura Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...