Questions & Answers for: 2488 button

button not working My Tascam 2488 Portastudio play and record button are not functioning. I have the same problem with all three of my Tascam 2488 MKII's. It's a software problem and starts to show up

...2488 to factory defaults: Simultaneously press quick routing/shift/send/shutdown & turn on the unit. The 'stop' button problem may require a look under the cover to see if the button is dirty or ...

...2488 cannot boot up. When I start it, it says,"cannot boot. not detecting HDD correctly. Check H-W". How can I solve this issue? Thanks a lot. Turning the power off with out going through the ...

...2488 menu button not responding when i press it, all of the other buttons respond The only problems I've had with my 2488 thus far have been sticking buttons. It seems the transport buttons often go ...

...2488 original (not one of the more recent mk models) I made the mistake of shutting down without the shut down button...just ... just turned off with the power switch. Upon powering up again, ...

...2488. The unit does not have a pause button, so it is critical that the record and play buttons work right or else the unit is non-functional. MIne stopped working, so I used "DeoxIT" D-5 contact ...

2488 Neo Digital Portastudio. I need a simple answer to a simple question: I wish to monitor my voice in reverb through the microphone before recording. What buttons (and in what sequence) do I engage

...button. Although, when I tried this on my own machine it didn't ask 'Are you Sure?', but the initialize procedure worked. My 2488 is showing software version 1.03, so if your ...

...2488 just displays distortion effects page,, Re: Tascam 2488Hold down the 'SHIFT' button, and press the 'Tuner' button to get the tuner on screen.  Press 'Home' to exit ...

service manual or schematics of tascam 2488 the buttons for the first 10channels didnt work. i suggest the multiplexers, but i have no schematic. could anyone help me with the schematics or the ...