Questions & Answers for: 23 5 thermistor

...Thermistor read open or shorted for 10+ seconds, or repeatedly read erratic temp?s 20 Defrost Under-heat with No Voltage Feedback Through Gray/White Wire at Defrost Start 21 Defrost Overheat 22 No ...

...23 Exhaust Thermistor Shorted ?F-23? flashes if the thermistor has shorted. See TEST #3a. F-26 Motor Drive System Failure ?F-26? flashes if there is a motor drive system failure. See TEST #2. F-28 ...

...a technician in case you need a new thermistor. If F 23-1 really F2-31? If thats the case, that is a component error and needs to have further troubleshoot and service work performed by a

Dryer stops and gives code F-23 It will restart, but it does it again. Kenmore Model HE2 The Exhaust Thermistor is shorted. Replace the thermistor.

...23 degrees to 217 degrees F). This usually indicates a bad thermistor (temperature sensor). A bad wiring connection or a failed control board could also cause this problem. If you have the technical ...

thermistor. The proper resistance level should be 10000 ohms @ 77° F/25°C. Anything considerably above or below that will confirm failure. When testing; Unplug the harness connector and test

thermistor is 270°C or higher: "9", "19", "21", "22", "23", "25", "27" or "29". - The error occurred during printing: "24" or "25" - The error occurred during energy saving: "26" or "27" - A paper jam

sc542 error on lanier That is a dirty thermistor in the fusing unit.

my firg will no hold temp, why several factors the door seals, the thermistors, the cold control thermostat. bad control board. bad operating fan?

dryer model 110.87872603 is overheating, code F-23, changed thermal fuse, outlet thermistor and heating element, still overheating what can be wrong? Check for lint build up at exhaust outlet.