2004 pontiac grand am 3.4 rocker arm torque? the rocker arm torque specs for the la1 gm 3400 sfi v6 is 168in lbs or 14ft lbs and 30degrees past that hope that helps you it came straight from my local ...
what are the torque specs on a 2004 grand prix supercharged intake manifold Here they are
...torque on wheel bearing bolt. If you do not have the specs. a good rule of thumb is with the nut just slightly tight and the wheel and tire installed but jacked up, spin the tire by hand and tighten ...
...2004 grand prix gt 3.8 engine head torque table Whaat is 2004 grand prix gt 3.8 engine head torque specs table Go to autozone.com create a free account put in you cars model year etc... then look at ...
...specs for the harmonic balance on a 2004 pontiac grand am V6 3.4 liter. I always use 80 foot pounds no matter what GM engine it is. After 35 years of rebuilding engines none has a problem ...
where is the knock sensor There are two of them, they are screwed into the engine blocks cooling water jacket (where the drain plugs would have gone for the block without sensors) below the spark ...
2004 Grand Am 2.2L, I hope it helps: -------------------------------------------------------------------------- Timing Chain, Sprockets, and/or Tensioner Replacement ----------------------------------
Question about 2004 Grand Am
what is the torque specs on a 2004 pontiac grand prix GTP Comp G for the lower intake manifold? Here is the order and specs
2004 Pontiac Grand Prix "service theft system" continues to come on. At times, disables the car and won't start. How do I actually fix it. Temp fixes already known. Is it a sensor or a fuse or ...
Question about 2004 Grand Am
2004 Pontiac Grand Prix gt2 torque specs for front left wheel hub, 3 bolt I usually just go to 2 ugga duggas and call it good.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
