Question about 2004 Wrangler
transmission 2004 jeep will not shift up malfunctionlite is on the problem just started Check fluid level or check your shift linkage for any obstructions
...2004 jeep wranglers auto full of dirty water the trany won't change into top gear. i have changed the oil 3 times and their is now clean oil in there. what could be wrong with this trany. did you ...
...Jeep Wrangler/YJ 1987-1995 Repair Guide Engine Oil Fig. 1: Be sure to select the proper API quality classification and SAE viscosity grade of engine oil (10W-30) Oil FIlter (K&N sample) HP-2004 ...
...2004 jeep wrangler x well the only two places it can be leaking form are the front tanny seal or the pump seal if its minor leave it for now, because to fix it you have to remove the
Question about 2004 Wrangler
...2004 jeep wrangler with a manual trans rattle in nutral I have a 2004 jeep wrangler x with a manual transmission and when in nutral and the clutch out it rattles. Is this normal? Or does it need ...
...what you removed. Hey, i have got a 2004 automatic jeep erangler, when gear is shifted to reverse it returns by itself to parking, has it to do with transmission fluid or major gear problem? ...
...2004 jeep wrangler Hi, if you just changing filter and fuild it holds 4Qt of atf+4 transmission fluid.If transmission been replace it holds 8.8Qt. If you need further help just re post. Thanks dodge ...
...jeep wrangler with the code po733 po733- gear 3 ratio incorrect this is how to fix. You can try replacing the shift solenoids inside the transmission as long as the trans fluid is nice and clean ...
2004 Jeep Wrangler 4 cyl. The CEL came on. Had no power for a little bit. Went to autozone and it pulled code P0870. Any suggestions. po 870 refers to transmission fluid pressure- check fluid level of
2004 tj 4.0 L with auto transmission shift problem check the fluid make sure its full
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions