Questions & Answers for: 2003 jeep 4 head gasket

Ad

...2003 Tiburon and cylinder #4 is not working, I switched the plug wires and still didn't work , with the switch the other cylinder worked fine, thought it was the head , i pulled the head and all ok, ...

Ad

Question about 1991 Cherokee Briarwood

1 Answer

...Jeep Cherokee 2WD 4.0L MFI : Foot pounds (Final torque) Note: Torque sequence ------------------ front | 12 8 4 1 5 9 13 | of | | engine | 11 7 3 2 6 10 14 | ------------------ Final torque must be ...

Ad

...4.0L Replacing the head gasket and can't find specs for the Head Bolt Torque for my friend's 2000 2000 Grand Cherokee Laredo 4.0L the torque is a 4 step process 1 torque all bolts to 22 ft/lbs 2 ...

...only to the cylinder head gasket. Do not allow sealing compound to enter the cylinder bore. What is the torque specs for the intake and exhaust manifold for a 1997 Jeep Cherokee Sport? 6.. ...

Question about 1993 Cherokee Country

1 Answer

HEAD GASKIT? Buy a gasket kit for the upper end. Remove the valve cover intake and exhaust manifolds. Remove the head bolts. Remove head and clean up block from old gasket material. Take the head to a

Question about 1993 Cherokee Country

1 Answer

...for jeep wrangler 4 cyl. year 97 head gasket Tightening Sequence 8 - 4 - 1 - 5 - 9 7 - 3 - 2 - 6 - 10 Pass 1 - 22 ft/lbs. Pass 2 - 45 ft/lbs. Pass 3 - # 7 - 100 ft/lbs. Pass 3 - All others - 110 ...

Question about Motor 2003 Elantra

1 Answer

...specs 2003 elantra head bolts head bolt specs and cam caps 3 layer head gaskets torque to 22 ft/lb then 60°-65° then 60°-65°again. 2 layer head gasket torque to 18 ft/lb then 60°-65° then 60`-65° ...

jeep 3.7l on cylinder head Hi there: Install the cylinder heads. Use new gaskets and tighten the bolts, in sequence, as follows:Step 1: Bolts 1-8 to 20 ft. lbs. (27 Nm)Step 2: Bolts 1-10 verify torque

Question about 1989 - 1990 BMW 525i Engine Cylinder Head Bolt Set W0133

1 Answer

...for that engine application. 4. Locate the specific ..... 2) 11-18, 3) Long bolts turn 85-105 degrees;. Short bolts turn ..... 134f f-head Jeep. 1971-69 .... 244 sohC (4.0l) 12 Valve ford 2007-06.

Question about 1989 - 1990 BMW 525i Engine Cylinder Head Bolt Set W0133

1 Answer

2003 jeep Cherokee 2.5 If the gaskets come with a coating of sealant, do not use any extra.. MAKE SURE the gasket surfaces are FLAT, CLEAN (with sandpaper/machining/wire brushing..etc.. and clean with

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22408 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...