Questions & Answers for: 2003 hyundai santa fe blower

...santa fe how can i remove control knob? Don't. What you have to do is take the ashtray out then remove the 2 screws. Pry the whole assembly off and replace the switch in the back. The knob only moves ...

...Santa Fe 2003 I need to find out where the fuse panel is located, in which the heater blower fuse would be found..I didn't receive an owner's manual when I purchased the vehicle. Thanks.. It sounds ...

2003 santa fe My blower fan only works on and off...Needs to be replaced I have removed the panel and disconnected all electric connections. I have removed the screw that fixes the switch to the panel

...blower switch TRYING TO REMOVE PART OF DASH TO GET TO BLOWER SWITCH, DOES THE WHOLE DASH HAVE TO COME OUT No... the dash does not need to come out.... just the vertical console... snaps in. There are ...

...2003 hyundai santa fe the blower motor stopped working on medium and high speeds just blows on setting 1. replaced the resister and still same problem have u tested the blower motor switch? also look ...

the blower motor resistor. that is the correct name. hyundai used 2 designs in the resistor because they switched from old to new design. Thats why they ask if its a 3 or 4 wire. not sure on the price

...blower switch and it still doesn't work. First check the fuse, then test the power wire to see if power is getting to the switch. If the previous check OK test the blower motor to see if it is ...

2003 hyundai blower stop working dont know what fuse to check its santa fe LOCATE THE FUSE AND CHANGE IT OUT IT .S A FUSE RELAY there is a short to ground some where in the dash. you will have to open

My Blower motor stopped working, I replayed the relay, the blower moter, resister and cluster panel..but still not working.. Maybe Blower Switch ???

i have a 2003 Hyundai Santa fe the blower fan stays on it was working fine then all of a sudden the blower fan stayed on short in the switch- worn out /or a bad fan motor