Questions & Answers for: 2002 hyundai santa fe brake

Santa Fe? I just changed the brake pads on my Santa Fe (2001). My pedal is going to the floor now so I need to know how to bleed the line. I am not sure on this one. Could you let me know. Thanks alot

...santa fe are sticking and i don't know why. We just did a complete brake job on the vehicle thinking this would fix the problem, but to no avail. Can you help? They are sticking and heating up the ...

2002 Hyundai Santa Fe ABS 4whl dr > Just replaced the brake pads (4 wheels) had the rotors turned. I calapsed the calipers and installed the pads. Reassembled and bled the brakes. If I pump the brake ...

...hyundai santa fe Start at rear and pump up brake pedal till hard and hold, while someone at rear releases bleed nipple, Person in car does not release pedal off the floor till bleed nipple is ...

...2002 Santa Fe go clear to the floor before I even start to slow down. I've changed Master Cylinder twice and the brake bads are all fine. What else could cause my brakes to work like this? leaks...do ...

...Santa fe ..sometime brake peddle gos to floor .fluid pads ,rotor like new ,no fluid leaks .. any help would be great With some abs systems the pedal will go almost to the floor if pressed hard ...

...2002 Hyundai Santa Fe I was checking my left rear brake pads on my 2002 Hyundai Santa Fe. I found the upper pin missing and was able to swing the caliper left/forwad, exposing my brae pads. Is this ...

...2002 santa fe remove tire remove caliper and pads with two bolts and adj emergency brake off all the way or untill rotor will come off .Replace shoes (if you don`t know how remove only one side and ...

2002 hyundia santa fe v-6 about 2 months ago i took it to a shop because i was leeaking brake fluid so i bought a new master cyclinder for the brakes well it wasnot the master cyclinder it was the 2 o

2002 hyundai santa fe battery and brake light flash when accelerating why? This tells that some sort of temporary problem has occurred. Could be the alternator failed, or the belt is loose/frayed. The