Questions & Answers for: 2002 dodge intrepid thermostat replacement

...dodge intrepid 2003 The intake where the thermostat goes is in the driver side of the motor behind the altenator. I had to remove the front clip of the car and the altenator to get to it. It is quite ...

...2002 Dodge Intrepid-2.7 Is the thermostat for a 2002 Dodge Intrepid, 2.7 really under the car? This doesn't sound like something that would be easy to replace. Does anyone have any ideas? If I would ...

...for repairs how much would it cost to replace the radiator, thermostat, and alternator in a 2002 dodge intrepid when the radiator and alternator are already pulled out. parts and labour 1000.00 ...

...2002 dodge intrepid 2.7 liter engine. When bleeding the system i get all air. My first thought was an airlock. I have tried everything i know how to do to get the airlock out. Still I have all air ...

...2002 intrepid with the v6 27 have a coolent leak replaced the thermostat houseing and still leaks , it is leaking next to the bottom bolt on the thremostat houseing , from a small hole about the size ...

...2002 Dodge Intrepid, without even using any tools. It has helped millions of people, and I am certain that it will help you, because I wrote it for people like you. So here is the link: How to ...

...2002 Intrepid It is behind the alternator. You will need to remove the alternator slightly to gain access to the thermostat housing. Best example, follow the bottom radiator hose to the block. Hope ...

2002 Dodge Intrepid, my heater is not working, and is wondering how you put coolant in, when the radiator is hidden and the overflow tank says do not open? Any suggestions? you put it in the over flow

...2002 dodge intrepid, is there a quick fix?? this has to be the most difficult car to work on! I've already replaced the thermostat before it was still leaking and starts to overheat mainly at ...

2002 dodge intrepid the heat blows but doesn't get hot! Had the thermostat replaced but still no heat. What would be the problem? either a heat switch is not switching heat to the compartment or else ...