...Isuzu Trooper that had a PO401 code that would reset and then 2 miles later the light was on again - I found if you remove the EGR valve and start the engine that the engine should idle rough - If it ...
...auto parts store like AutoZone. They will check the code(s) for you with no charge. First I would disconnect the battery for two minutes, then reconnect it. The code should reset if it was
TOD Check light? My check light under the TOD keeps flashing on and off. Please help me what should I do? Have a local shop or auto parts store perform a "Fault Scan" - Most good auto parts stores ...
...reset the engine light so it can go off..Thank you. Hi, if you have corrected the problem, the light will go out by itself within a few hours of driving the truck. If it doesn't not go out, have ...
ISUZU TROOPER 3.2 V6 CODE P0101 it's seem like the code is air flow sensor range performance, i had change the new one air-flow and throttle body but still can't fix the code, when i ...
Question about 2001 Trooper
...2001 Isuzu trooper my problem with it now is the transmission light is flashing and the check engine light is on Okay if you have checked you fluids and made sure they are full then you may need to ...
...trooper 1997 English please. Posted by Anonymous on Jul 08, 2014 . or put on new gas cap. the reset the codes, using a scan tool or pull the ecu memory fuse. or wait for 40 plus driving cycles. if ...
Question about 2001 Trooper
...2001 Isuzu trooper unlimited have an auto shop check the code. or disconnect battery for a few minutes and the light should reset. Get the code don't just reset it. It came on for a reason find out ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions