Questions & Answers for: 2000 silverado hard start

My 2000 Silverado jerks when shifting in between 1st and 2nd gear? if it is a automatic gearbox check the level off the gearbox oil if it is tho low it starts tho shift pritty hard

Ad

Question about 2000 Silverado 1500

2 Answers

Silverado power steering doesn't seem to work at low rpm/slow speeds, if I give it a little gas(increase rpm) it will work, the power steering fluid level is O.K., any ideas? Pump is starting to fail.

Ad

...2000 curbside pickup- The vehicle is hard to start after the morning start. It takes a number of turns to start it and I have to touch the gas peddle. Sometimes it staters when I start it and move ...

...2000 chevrolet silverado truck that the tow/haul light keeps coming on and going off and the tow haul engages without starting it. My Gas had even when full will from time to time drop to the E and ...

...2000 Silverado, 5.3 liter. The engine is ideling rough in warm waether and also hard to start when the engine is warm. Is this a fuel pump issue? Start with the simple and replace the fuel filter and ...

...2000 silverado has been starting hard after its been running for awhile. usually starts up fine first thing in the morning. ive replaced air, and oil filters. added fuel cleaner and cleaned throttle ...

2000 chevy silverado starts up fine when engine is cold but hard to start after warmed up and already changed plugs and wires didnt help Maybe battery or starter is going or positive cable to the ...

I have a 2000 chevy silverado 5.3, it starts fine when it cold,but starts hard after it warms up,unless I start it with in a few min. after stopping. Fuel Pressure Regulator !

Question about 2000 Silverado

2 Answers

...2000 Silverado (classic popping sound) then I turned down my stereo and realized it was coming from the rear drivers side. When I pump the breaks it will stop. This is driving forward or turning. Can ...

Question about 1999 Silverado 1500

2 Answers

2000-chevy-silverado-yourself/ That year model should have Chevys Vortec engine as it's power plant. If so, the fuel pressure regulator is integrated into the fuel injector assembly inside the plastic

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...