Questions & Answers for: 2000 jeep cherokee blend door

...2000 Jeep Grand Cherokee Limited. V8. The car has had all the typical jeep issues I have replaced the tail lamps and the entire air conditioning system. Just recently when I turn on the heat it blows ...

...though turned to high. Also drivers side side window defrost is not working. What is the problem? You have a problem with the outlet air temperature control blend door or the motor that actuates

2000 Jeep Grand Cherokee worked intermittently but does not work at all now. The only climate control is forced air while the vehicle is in motion. The vent that opens and closes to change from hot to

2000 grand cherokee w/ auto climate missing motor on mixing damper under dsh what is this called so I can replace it thank you IT IS CALLED THE BLEND DOOR ACTUATOR MOTOR.

...blend door operation or the temp blend door actuator. If all good there perhaps the control head itself is faulty. Check to see if the temp,door is moving when you change to hot on the selector .Then ...

...- The A/C heater control. -The blend door actuator(s). -The wire harness circuits for the A/C heater control or the blend door actuator(s). -The blend door(s). - Improper engine coolant ...

...blend door linkage reachable from under the pass. side dash? with out takeing out the whole dash? no u must remove the dash. This actuator is located on the front of the HVAC housing to the right of ...

I have no heat in my 2000 Jeep cherokee, cant seem to turn off the ac - any ideas ? there could be 2 things wrong the blend door could be broke or the blend door actuator needs the be replaced

...2000 jeep grand cherokee. Thanks in advance. Duane y9ou can gain access to the driver side blend door actuator by removing the glove box. The actuator will be in the left corner of the glove box ...

...blend door actuator. It separates the driver and passenger side from getting air on the AZC system. Here are some instructions on replacing it: The passenger side blend door actuator is used on all ...