...focus has just failed its M.O.T on one side of the hand break how do i fix this please hi there, you will need to slacken of the cable adjuster just next to the handbrake lever under its gaiter, jack ...
2000 Ford Focus parking brake sets but will not keep the car from rolling. remove rear brake drums ,slacken handbrake cable then clean lip out on drum with a small angle grinder then manually adjust ...
rear passenger wheel bearing . does it require a hub puller to remove the drum ? no, but the drums are often stuck on a ridge ffrom where the brakes wear into the drum. Go to your ford dealer and have
...rear wheel studs...3 out of 4 are broken. How difficult is this? Should I just purchase another drum? Is the drum difficult to get off and install for a want to be mechanic? drum is not hard to get ...
HOW TO REMOVE REAR BRAKE DRUM OF A FORD FOCUS 2000 SE Undo the bolts from the back of axle.
Ford Focus SE. I don't want to remove the hub & spindle. I simply want to replace the drums & Brake shoes. The drum and hub are one assembly on that vehicle so you will need to remove the dust
...2000 Ford focus. I removed the spindle nut, 2000 Ford Focus Drum Removal ProcedureIf removing the drum to service the rear brakes: (note, do not remove hub retaining nut for this procedure) 1. Raise ...
...ford focus zx3 2000 i have a new drum with the studs but i cant take off the old one i read i need to remove 4 nut on the back but that will remove the drum and the spinin nut and the base that hold ...
Question about 2000 Focus
...focus lx 2000. One of my rear drum brakes,'s bearings went. I got a scrapyard full drum unit, but it doesn't have ABS. Can I take sensor ring out of existing bearing unit and put it I have a ...
drums rear remove Release handbrake adjustment in the centre of hub is a cap prise it out and you will find a 32mm nut remove this and with a couple of taps off it will come.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
