Questions & Answers for: 2000 blazer hub

2000 Blazer Check engine light is on, I want to do a tune-up, and see about fixing the 4WD, also would the check engine light come on if the front hub needs to be replaced? Check engine light does not

abs light is on brakes are fine does this rig have a speed sencer on the rearend like jeeps it's the sensor in the hub bearing that is the problem. These blazers are well known for these to go. You ...

2000 Blazer ABS engaging Recently changed front passenger side wheel bearing (2nd time) and now the ABS activates just before I come to a complete stop. Why? Solutions? (replacement went smooth - no ...

2000 chevy blazer braking problem when I start to brake my car skips and doesn;'t want to stop. I took it into a shop and they said I needed a new hub, that it was burnt out. My friend said that the ...

2000 chev blazer. it makes a rather loud grinding sound in the front end coming from the wheelwell area. i took it to a garage and they said i needed to replace the wheel bearings and the hub assembly

...the front hub assembly for a 2000 chevy blazer ls 4x4 the center bolt for cv axle!103ft-lbs,hub bearing assembly bolts!77ft-lbs 2005 Chevy 1500 4x4 front hub bearing assembly, what is the torque ...

...2000 chevy blazer 4x4 abs light still on ? 2 areas of concern here involving the ABS light: After replacing the hubs, bleeding the brake lines and replacing spent brake fluid Replace the ABS sensors ...

blazer 2000 4x4 and abs light still on. new hubs an sensors Turn on ignition switch and system should chk itself. If all is right the light should drop out..You may have to drive it for the sensors to

2000 chevy blazer drive axle hub nut torque specifications I am not positive but I think it is 250ft lbs. Call a local dealer they can tell you for sure

2000 chevy blazer viberates bad I have a 2000 chevy blazer, on my way to work on morning, the 2 metal fuel lines came out of the plastic intake causing the blazer to die, put them back in the blazer ...