Questions & Answers for: Uniden 1k resistors

one will not keep batteries one handheld with fresh batteries will work only 4-5 minutes. The unit is drawing too much power. Take the unit apart and look for any resistors that are bubbled clean any ...

i have sound but no tsmt,the tsmt light does comes on,no output power was hooked up backwards & I replaced everything blown in power input and now I have receive but no tsmt at all well that leaves 2 ...

CB Radio I Just got a Uniden PC68XL CB Radio. I was Just wondering if anyone knew what the modulation pot is on this radio? Also if anyone has any ideas on supermods and things like that that can be ...

how to adjust the dead key in a uniden pc78ltw You change the dead key with the addition of 2 components to the board. There is no dial or pot inside to turn to adjust the dead key. What you want to ...

I used the wrong ac adapter on a Uniden BCD396T scanner and now it will not run on ac and won't charge the rechargeable batteries. There is the odor of a burnt resistor. It does still work using ...

...pc68xl does not tx or rx. all lights comes on. I have no schematics to work with. Try to change a 1k resistor R6(I believe) near back of radio. If not, try to change Final. Maybe small transistors ...

uniden grant lt transmit and receives normally but when i key up on AM the AM power regulator gets hot quick i changed out the driver and final and replaced the regulator still does the same thing and

how to add talkback to a uniden pro510xl 68 to 200 ohm resistor to the postive side of the speaker to board ground

put talk back in a uniden510xl take the top cover off,find the point where the ext and pa speaker are now solder a 33ohm1/4watt resistor across those points from positive side to negitive side and it ...

how to get modualation talk louder??? look for the transformer next to the antenna connector . There should be a variable resistor adjustment next to it .Turn it all the way to the right and if that ...