Questions & Answers for: 1 4 trs cable

...cable (male-female) and connected the mic to the mixer but the TRS Line in is still empty and the mic is not working even though the phantom power is on. What must I do? (I think its the TRS in but ...

cable that is trs-balanced on one end and rca's on the other. then just get a "Y" right-left rca into a stereo 1.5 cable. easy and cheap. but using xlr's for output? NO. save those for your input MIDI

to 1/4 TRS (stereo) cable from the PC into the Stereo 1/4 inch jacks right below the RCA stereo input jacks. TRS stands for tip-ring-sleeve which means the jacks have the extra "ring" over a mono jack

Computer->M-Audio-FastTrackPro USB->trs outputs 1/2->linein 11-12 of mackie 1202-vlz3. How can i get stereo sound out of the mackie? Use TRS to TRS balanced cables from the M Audio to the ...

...TRS at the PMP3000 into a send and receive to plug into your effects unit. These cables are NOT readily available usually and you have to make them yourself. Sometimes you can use a stereo splitter ...

...balanced interconnection. They will be twisted pair within a shield. Here is an example: ...

...cable..thank you.. The 1/4 inch should be a TRS (balanced connector) You should find pin 1 of the XLR to the sleeve of the TRS. Pin 2 of the XLR can connect to either the tip or the ring of the TRS ...

...buzz on the same setup.... what is causing this? ?? If you use 1/4 inch cables they MUST be TRS cables (balanced lines). Guitar cables that do not have the third contact (ring) will have buzz ...

...TRS cable to aan EQ that has TRS INSERT jack. If your EQ doesn't have this, then you will need to find or make a "splitter" cable. The tip of the cable is the send to the EQ and the sleeve is the ...

trs cable. Should I have connected dual stereo to single trs one? also the eon manual says to depress the mic line switch to select an audio instrument. The trouble is there is no mic line switch that