...Expedition stating misfiring yesterday and the check engine light started blinking. I went to Auto Zone and had a dynogistic test ran on it and it said that the #4 cyclinder had a misfire and the EGR ...
Expedition # 3 Misfire I had my check engine light go on last night i took it to the local Autozone to havethe diagnostic test done it shows a misfire on # 3 they told that could be a number of things
When my check engine light came I had it tested it said that number five clyinder was mis firing I change the spark plugs no help I moved the coil pack to another cylinder no changewaht else could it ...
I have 1998 epxpedition my engine light is on truck run rough ,I t is saying the number cyl is miss firing I need to know what is the firing order on the expo it is a 5,4l. I think it may be the ...
i need to locate the number 4 spark plug wire to replace the spark plug can you tell me how to locate this wire on a 98 ford expedition Hi, #4 is closest cylinder to the passenger.
what does error code p0172 and p0174? P0172 - Fuel Injection System Too Rich Bank 1 Symptoms - Engine Light ON (or Service Engine Soon Warning Light) - Excessive Fuel Consumption Possible causes - ...
when i go up a hill or go over 40 the service engine light blinks on and when i let off the gas it shuts off. what could be the problem? it has what they call a loaded misfire...you need a coil assy ...
...1998 FORD EXPEDITION With a scanner connected to the car it may have codes to help you find the correct problem. like P0300 is readom cylinder missfire ( this means that many cyclinders miss and can ...
need number 7 cylinder location drivers side, 3rd one back. the passenger side is 1 2 3 4 , drivers side is 5 6 7 8
Cylinder#1 should be in the manual or on the label in the engine compartment. Hi I'm Peter, I'm not sure what we 've tried everything means. You have a code so I have to assume you have a code reader.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions