Questions & Answers for: 1990 jeep wrangler problems

Question about 1990 Wrangler

1 Answer

1990 Jeep Wrangler Problem: The head lights, the radio, and the clock stopped working. 1990 Jeep Wrangler. Driving with lights on for 10 - 15 minutes. First the dash lights go out followed by the ...

Ad

1990 Jeep YJ 6 cyc. Won't Start---No Spark From Coil 1990 6 cyc., 4 spd, carburated. Jeep won't start. Getting no ignition spark from plugs, distributer, or coil. Replaced coil and checked all fuses. ...

Ad

Question about 1990 Wrangler

1 Answer

1990 Jeep Wrangler 4WD won't engage. Stuck in sand and back wheels spin, not front ones though. What could problem be, how do I fix it, what do I need to fix it? Thank you Most likely the vaccum ...

...the transfer case use, 1990 jeep wrangler 231j dextron III or mercon atf. (I use lucas trans conditioner additive to give a bit more protection, and have had no problems, but it's a non factory

...1990 jeep wrangler an i still have no pedal presure it sounds like you need to bleed the brakes. If the pedal will not pump up to bleed the brakes then you must have bad master cylinder. We just had ...

1990 jeep wrangler I changed shift motor out still no 4x 4 but i now have the 4x4 light on dash.problem? did you get the shift motor fork in the slide collar

1990 4 cyl jeep wrangler i just filled tank with gas drove 1 block and jeep stalled. Jeep starts right back up but will not stay running seems as though its not getting enough gas. Is this a fuel pump

...1990 Jeep Wrangler 4 cyl.I need to put in a new fuel injector and replace the timing chain, could your direct me on how to repair these problems. Thank You get a haynes manual at a discount place or ...

Question about 1990 Wrangler

1 Answer

1990 jeep wrangler starter grinding Have a problem many people have had, starter grinds against the flywheel teeth rather than meshing correctly. Has anyone had any luck fixing this problem. One ...

1990 jeep wrangler motor has no compression i totally rebuilt my 1990 yj 6 cyl jeep wrangler all the machine work was done professionally but once all in it wouldnt start i did a compression test and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...