1981 corvette Just got corvette and it needs the booster replaced you will have to remove the master cyl no need to dissconnect the lines and dissconnect the vacuume line and from inside the car under
Question about 1981 Corvette
...1981 corvette offer a 230 HP engine or just the 190 HP I read an article that if the 8th position in the vin number on the 1981 vette is a 6 that indicates a 230 HP engine. What say you. Thanks and ...
...the Engine control module i need to locate the ecm on a 1981 corvette? Does anyone know where its located and what it looks like? surly a car that old wont have a ECM think you will be lookin for ...
I need a vacuum diagram for a 1981 Corvette 5.7 liter carburetor engine, how do I find that? If not under your hood then i would suggest getting a GM. repair manual.
...1981 corvette but it has computer hook ups. How do I install since the carb is not made for computer controlled engines You would get the correct carburetor instead for electronic computurized ...
1981 corvette that has been stored for sevral years. I recently started it and found that all of the gauges do not work. The choke light, engine and battery lights remain lighted whenever the ignition
I have a 1981 corvette, where is the plug in for a computer to check problems, my check engine light stays on. thanks take out the ash tray its under there.
...1981 CORVETTE WITH 1993 350 4 BOLT MAIN MOTOR AND TRYING TO GET INFORMATION ON IT WITH A STAMPED NUMBER M09014VP AND CAN'T GET ANYWHERE SO DO YOU THINK YOU CAN HELP I would google it, or call a parts ...
1981 corvette running lights stay on when key is off rebuilt engine pulled all pollution off now running lights stay on when car is off lights must be connected to a circuit that does not run thru ...
Question about 1981 Corvette
Looking for the O2 sensor on my 1981 corvette getting a code 13 and a code 44 on the exhoust pipeclose to engine
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions