i nead tourque specs for 170 or 200 ford state 6 and spark plug gape spec and point gape spec Go to your local auto parts store and ask the clerk to get you a Chilton's or Haynes manual. Or try Google
...mustang 200 engine. After changing the spark plugs, it runs great for about 10 miles then starts to sputter and runs really rough. Black smoke coming from exhaust. Carburetor was replaced several ...
Spark plug wiring diagram for a 1965- 289 ford V8 Here ya go
i have mallory unilite distributor and i dont know what to gap my spark plugs at you can find that information in your local chiltons manual or you local parts store
...1965 ford mustang 289. The distributor is brand new, carburator is new, plugs are new and still won't fire to start. I think the wires may not be on the proper spots. Try this. If the distributor is ...
1965 mustang the car starts and runs but when put into reverse or drive the car stalls this happened after i canged the spark plugs and replace all the wiring, i dont have very much experince on ...
...1965 Ford Falcon Ballast resistor. I am having trouble locating it so I can replace it. Ignition ballast resistor is usually mounted on the firewall near the back of the engine. It's white, ...
Question about 1965 Mustang
...1965 mustang 302 have no spark it cranks but won't turn over. How can I go by figuring out what's wrong with it It won't crank when turning ignition but when u connect the negative battery cable to ...
Question about 1965 Mustang
1965 4 speed mustang to backfire and sometimes stall? sometimes my 1965 4 speed mustang stalls and backfires, what causes this? backfiring is ignition of the fuel mixture while an inlet valve is still
Spark plug gap for 65 Ford Mustang 289 v-8 Just need the spark plug gap for the above car .034 gap. Different spark plug manufacturers may have different spark plug specs?
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions