Questions & Answers for: Dodge Intrepid we 16

...DODGE INTERPID 2.7 LITER I NEED TO KNOW WHAT COULD BE WRONG WITH MY CAR WHEN IT IS SHOWING CODES 16 AND 13 DOES ANYONE HAVE AN IDEA IF SO I COULD REALLY USE THE IDEA BECAUSE I'M GOING CRAZY AND I ...

Ad

...a lot of black smoke comes out. Also my gas mileage is not that great i think i am averaging about 16 mpg. Thanks Matt MAF and ECT sensors are the first I would check . Next would be the O2 s

Ad

Question about 1994 Intrepid

1 Answer

i need wiring diagram for a 95 dodge intrepid for the audio system Courtesy of Bulldog Security, this link will provide all the info you're looking for. Best of luck on an easy install! http://64.85.6

...oil sensor on 01 dodge intrepid It is on the lower passenger side of engine. You will need a 1-1/16 wrench. It has a electrical connector attached to it. Push out the red lock pin then push in and ...

...inserting a screwdriver in the end of any plug wire and holding it next to the valve cover, about 1/16" away or above it, do you see spark jump? if not then check the crank shaft position sensor, and ...

I need to find out what engine code 16 and 14 are on a 95 dodge intrepid. i also got engine code 12 witch i know is start test.. not sure if 14 is end test or not. 14 map voltage too high or too low ...

i have a 2006 dodge stratus sxt with a 2.4 l 16 valve engine. i was driving fine. when it suddenly developed a bad hesitation at 60 mph. as long as i stay under 2200 rpms it runs fine but once over ...

can i put 235/60R16 on a 1996 intrepid? Yes if you have the stock 16 inch wheels as some came with 15's. 205/65-16 215/65-16 235/60-16

can i put 235/60R16 tires on a 1996 intrepid? Yes if you have stock 16 inch wheels/rims. 205/65-16 215/65-16 235/60-16

how do you have the transmission codes checked for the speed censor the OBD 16 pin connector under the dash has the data for the transmission ,engine,abs ,airbag ETC...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...