Questions & Answers for: Imperial 130 degrees

Ad

Question about ICVD-1-H Turbo-Flow Gas Single Oven

1 Answer

My oven won't heat to temp properly... My oven gets to about 200 degrees and then the gas starts to go on and off irradically. What is wrong? how can I fix it? All the ovens should be checked out at ...

Ad

Question about IFS40 Deep Fryer

1 Answer

problems with fryer Fryer lights up goes on then temp continues to climb past control setting, then shuts down. example Temp is set to 350 degrees and fryer stays lit untill it reachs over 400 degrees

Ad

Question about IFS40 Deep Fryer

2 Answers

fryer will only go to 250 degrees the deep fryer will only get up to 250 degree temperature Need to calibrate the thermostate,or replace it you can also jump the hi- limit switch an see if keeps ...

fyrer is letting the oil get too cold before burners kick on Lazy thermostat. There should only be about a 15 to 20 degree drop before the thermostat kicks back on. Replace the thermostat. Tom

Question about IFS40 Deep Fryer

1 Answer

No power hookup Highest Educational Attainment Household Population 5 Years Old and Over Male Female Philippines 66,666,156 33,466,674 33,199,482 No grade completed 3,962,330 2,020,113 1,942,217 ...

Question about ICV-1 Turbo-Flow Single Oven

1 Answer

degrees F. If we set the dial below the 175 mark, could we get the oven to level out at a lower temperature? We're looking to achieve a stable temperature of 130 F. If this is not possible, is there a

how u go about increasing thermostat when recalibrating Hi there!Using a precision screw driver, turn the thermostat calibration screw counter clockwise to increase the temperature cut-in of the ...

why does fryer shut down when it hits 200 degrees The thermostat? If your thermostat works normal, it should switch off the heater when the temperature is reached. Perhaps there is a last security, ...

Our Imperia fryer pilot lights shuts of once the temp reaches 200 degrees If both the main burner and pilot shut down at 200F, the high limit is bad. If only the main burners shut down, the thermostat

What are the normal fluctuations of oil temp for a 40 lb Imperial fryer. If I set the temp at 350 the oil heats to 375 and will come back on at 325 to 330. Is this a normal temp swing or bad ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Imperial Oven Experts

Dennis Boxerman

Level 3 Expert

1300 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

john h

Level 3 Expert

21761 Answers

Are you an Imperial Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...