Questions & Answers for: Amtrol 130 degrees

Ad

Question about ST-12-C THERM-X-TROL ASME Expansion Tank, 5 Gallon

1 Answer

not enough hot water. I have an Amtrol Extrol coil water heater I have both temperatures set at 160 degrees. the water gets hot but then soon after gets warm. Since you mentioned 'both temperatures' ...

Ad

Question about ST-12-C THERM-X-TROL ASME Expansion Tank, 5 Gallon

1 Answer

beeping noise "ER 2 " appears on LCD and a beeping noisefrom amtrol 41 gallon boilermate,says 120 degrees but feels much hotter than that,when i run the hot water for afew minutes,the beeping noise ...

Ad

Question about 2704E76 41 Gallon WH-7C BoilerMate Classic Series Indirect-Fired Water Heater

1 Answer

hot water not lasting long enough 80 gallon tank installed in this application. Tank runs cold rather quickly, temp at point of delivery was 118 degrees F at tub spout Check for crossover to eliminate

Question about 2704E76 41 Gallon WH-7C BoilerMate Classic Series Indirect-Fired Water Heater

1 Answer

heater broke, my Amtrol water heater expansion 80 gal tank, takes hot water from the oil fired furnace, and keeps it hot, However, the tank is set at 140 degrees, but the water coming out if the hot ...

Question about ST-12-C THERM-X-TROL ASME Expansion Tank, 5 Gallon

1 Answer

what is the proper temperature setting for a hot water heater Not getting enough hot water The answer different if you have: concerns about diseases, a dishwasher, young children or elderly that can ...

...130 degrees. I also noticed that the boiler water temperature rises to over 200 degrees when the water heater is turned on. However, if I turned off the water heater, the boiler water temperature ...

Question about WHS-80Z - WHS-80Z 80Gal Hot Wtr Makr

1 Answer

ER3 error code on amtrol hot water tank i ran out of home heating oil and the tank was left on for several hours.(normALLY SET AT 125 DEGREES). i just got heating oil delivered and the furnace is ...

Question about WHS-80Z - WHS-80Z 80Gal Hot Wtr Makr

1 Answer

Digital control keep flushing error3 boiler not getting up to temperature fast enough. If it is an electric boiler, there is a problem with the heating element. If it is oil o rgas fired, you do not ...

Amtrol model WH 7L 7P. The water is always to hot. The control value is set to less than 120 degrees almost off.What can I do The temperature controller may be defective.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Amtrol Water Heater Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Marvin
Marvin

Level 3 Expert

85111 Answers

Are you an Amtrol Water Heater Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...