i cant remove the starter Tools Needed: 17mm Socket Wrench with long extension and 12mm Combination Wrench Unscrew the positive lead at the back of the starter with a 12mm combination wrench and using
...a 2001 Toyota 4runner Limited 4 wd. Instructions and diagram would be great. Thanks simple really 12mm wrench an socket and 14 mm wrench an socket. lossen alt bracket 14mm then tesioner 12mm slide ...
...the alternator on a 1998 mitsubishi montero sport Disconnect the battery negative cable. Remove 12mm (3) and 14mm (4) bolts holding skidplate on and remove skidplate Loosen the 14mm nut on the ...
how do i change the oil you need to remove 2 undershield covers. one is metal held on by 4 12mm bolts, the other plastic by 5 12mm bolts. oil filter is front of engine slightly towards drivers side, ...
...Blazer with rear disc brakes. I attempted to change the pads today and found that the bolts were 12mm that were holding the calipers in place. I used my 12mm socked and removed the top bolt. When
stripped 12mm isuzu bolt hole stripped holes in aluminum block, the bolts hold the timing belt tension pulley adjuster in place, they are 12mm....what is thread size, and should i use a helicoil or ...
How to replace radiator 96 Toyota land cruiser - Remove battery and tray (12mm bolts x 8, 10mm battery and ground. maybe 13mm for tray if some previous guy got confused).- Remove fan from thermo ...
Question about 2003 Blazer
which set cannot form right triangles? 2.5mm,6mm6.5mm 5mm,12mm,13mm, 6mm,12mm,13mm 10mm,24mm,26mm 6mm, 12mm, 13mm
Question about 2003 Blazer
which set cannot form right triangles? 2.5mm,6mm6.5mm 5mm,12mm,13mm, 6mm,12mm,13mm 10mm,24mm,26mm 6mm, 12mm, 13mm
12mm in inch To convert millimeters to inches divide millimeters by 25.4 so 12mm / 25.4 = .4724 inches or in between 15/32 and 31/64 (12.7 = 1/2 inch)
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions