Questions & Answers for: Nissan Murano 02 sensor

Where do I find speed sensors on a 2003 Nissan Murano? I think the following are codes obtained from diagnostic: P0720 P1574 P1574 is the ASCD Vehicle Speed Sensor so it would be relative to your ...

Ad

Can I reset the tire pressure sensor my self? The Can I reset the tire pressure sensor my self? The sensor lite up, I put air in the tire about a month ago. The sensor light will not go out. Dealer ...

Ad

Question about 2003 Murano

1 Answer

It has a fault number p1051 and p1168 pls tell me what to do p1051 and p1168: P1051 A/F Sensor Heater (Added 29APR2007) p1168 A/F Sensor Heater. A/F Sensor The air fuel ratio (A/F) sensor like the ...

Question about 2004 Murano

1 Answer

p1031a/f sensor htr b1 Hello! There is a Nissan Technical Service Bulletin NTB04-070...Issued June 7, 2004 that addresses this problem...There is confusion at many dealerships concerning a P1031...It ...

Question about 2004 Murano

1 Answer

Dear Sir, I have Murano 2004 3.5L. engine. which way is fitted? the oxygen sensor bank 2 sensor 1 in the front or back of engine? thank you Bank 2 sensor 1, sensor 1 will be the front one, hope this ...

Question about 2004 Murano

1 Answer

NISSAN MURANO 2004 I receive an error on my screen Check Engine & after checking at the garage the problem was P0340 what would it be ?? & how to fix ?? when running on the highway the engine ...

nissan murano 2004 i need to solve this problem p0340 Hope this helps, it it does please leave feedback and vote Thank You and Good Luck Component Inspection CAMSHAFT POSITION SENSOR (PHASE) Loosen ...

...2004 is getting trouble code p1273 that is a code for the A/F sensor. that is a air/fuel ratio sensor aka front 02 sensor. used to be called front 02 sensor, but nowadays they call them A/F

...the honeycomb mesh inside your existing which is a pain or buy an aftermarket cat with nothing in it and make sure you have a spot for your 02 sensor and have muffler shop bolt it on or weld it ...

Question about 2006 Murano

1 Answer

What is P0011 code Hi there:DTC P0011 is a code for a Camshaft Position sensor failure.I would start with the cam sensor, then crank sensor, and clear the codes, see how it behaves on a test

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...