Questions & Answers for: Mazda 929 02 sensor

MY 1993 MAZDA 929 WILL NOT IDLE MY 1993 MASDA 929 WILL NOT IDLE,IT WILL START O.K. AND IT WILL RUN WHEN REVED UP. IT WILL RUN DRIVING IT AND THEN JUST DIE. I JUST CHANGED THE SPARK PLUGS, IT DOES NOT ...

Intermittently the car will not go over 25-30 miles per hour with the accelerator floored. Other times, the car bounces really badly as if it had a blown front tire (not) or totally worn out shocks ( ...

Looking to find the correct specs to adjust a TPS for a 1994 Mazda 929. Using a multi-purpose voltmeter. YOU NEED 2 VOLT METERS.FIRST OF ALL START ENGINE.LET IT GET OPERATING TEMPERATURE THEN TURN OFF

egines runs, but will not accellerate accellerater the engine will run but there no accelleration, it is a mazda 929 with av6 eng it just stoped accellerating whl driving home one day i have checked ...

While driving my 1993 929 down the road it just stopped running...had it checked out was told ti would be best to get a new motor and got a second opinion and was told to get a timing belt and fuel ...

02 Crank Position Sensor 2 (NE 2 Signal). 03 Crank Position Sensor 1 (G Signal). 04 Crank Position Sensor 1 (NE 1 Signal). 05 Knock Sensor. 08 Air Flow Sensor. 09 Engine Coolant Temperature Sensor. 10

correct vaccuum hose location Click the link below :----http://wikisolutions.blogspot.in/2012/02/get-free-answers.html

I need a picture of the speed sensor and where it is located on a 1988 Mazda 929 most speed sensors are located on the right side of the output transmission of the diff housing

i replaced fuel pump filter relay and mass air flow crank sensor throttle position sensor still not getting power to fuel pump ran a jumper to pump it works but not by the key i will check all the ...

I have a 1993 Mazda 929 checked battery and starter is good turns over but wont start? problems include
cam/ crank sensor failures
immobilizer not operational
flat fob key battery
...