I am in need of the programming codes for a dish network remote control. Can you please help

Hi there! This is Kimberly with DISH. I ran accross your post and would like to provide you with this link to our web page containing all the information on how to program your DISH remote to other devices. http://www.mydish.com/support/remote-buttons I hope this helps you. If you need additional information or have any questions please feel free to contact me at [email protected]

kimberly.Escobar
Social Media Representative
[email protected]

Remote Codes ' MyDISH ' DISH Customer Support

https://www.mydish.com/support/remotecodes

Remote Control Manuals · Program Remote to TV/Other .... remote, product type, and manufacturer below to see the current known remote codes you should try.

My Dish remote needs programming for Sanyo TV ... - Directly

https://www.directly.com/.../dish-network-my-dish-remote-needs-progra...

My Dish remote needs programming for Sanyo TV, Model DP226649. My Dish ... Needcode. Alta asked this ... Dish Network • 16808 answers • 95% helpful. Code is ... Test volume control, if it works you're set ... try 590 it should work. tivosat.

How do I program my dish remote to work for my Sanyo TV.

https://www.directly.com/.../dish-network-how-do-i-program-my-dish-re...

Dish Network. How do I program my dish remote to work for my Sanyo TV. ... entercode 590 press pound then sat Then try to turn tv on and off then try volume.

How do you program a dish network remote to my sanyo tv? ' Ya

Hello emanuelts! This Kimberly Escobar with DISH Network and I will be more than happy to assist you and provide you and help you with the information you need. You can follow this link http://www.dishnetwork.com/SupportSection/remote-setup here, you will find the codes to the different brands of televisions and the steps on how to program the remote. If you have any questions or need additional help please let me know You can reach me directly at kimberly,[email protected].




DISH Network
Kimberly Escobar
[email protected]

Hello! My name is Becki, with DISH Network. Programming the remote to the TV is a pretty easy process. I have given some codes that should work to program the remote. If not, please let me know!

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

566
828
824

Becki Barned
DISH Network Customer Service
[email protected]

Hi there! In order to be able to provide the definite codes that will allow you to program your remote to your Magnavox Blue Ray DVD player, I would need the type of remote that you have- this can be found on the back of your remote, it would be displayed as something along the lines of 3.0, 4.0, 5.0, etc. To obtain a few codes that will likely allow you to successfully program the remote I used 5.0 because it is a common remote that is used with quite a few of our DISH Network receivers. The codes you can try for your DVD player would be, 829 (most successful) if not then please try the following, 685, 533, 554, or 556. After trying those codes if your attempts are still unsuccessful you can also check the manual that came with the DVD player from the manufacturer or just contact us here at DISH Network - although I do know sometimes the remote codes can be located in the manual. Hope the codes help & work for you!

-Kirstie DISH Network

To program your DISH Network remote to your Sony TV you will simply- press and hold the TV Mode button until all the other mode button back lights illuminate, then release.

-Now while the TV mode button is blinking please enter in the remote code 500 which is the remote code for your Sony TV after entering 500 then press the pound (#) key.

-After pressing the # key on the DISH Network remote, the TV mode button should blink 3 times and then turn off completely. This will mean the programming of the DISH remote to your TV has been completed successfully. While still in TV mode try any of the functions on the remote, such as turning the volume up or down on your TV or attempting to press the power button.

-The DISH Network remote should now be programmed to control your TV.

-If the remote code 500 doesn't program the DISH Network remote successfully you can also try each of the following using the same procedures, 000, 590, 640, 502, 002, or 567.

I hope this resolved the issue for you! Please feel free to contact us if you need any additional assistance.
-Kirstie DISH Network

scorpionjdl6

I have provided a link with instructions on how to program the remote to your Magnavox TV and with the remote codes. I hope this helps.

http://www.dishnetwork.com/SupportSection/remote-setup

Ray Calo
DISH Network

Try 627 for Vizio TVs - that should work on the Dish remote.

Follow this link and got to the remote section. Once there shoose the type of remote you have and select remote codes to get the ones for that particular remote that may operate the piece of equipment desired. I hope this is of assistance to yoiu and thanks for using Fix Ya. Please let me know if I can be of further assistance.
Jim

dish network remotes are universal, you can program your receiver, vcr/dvd, telivision and stereo to most remotes. if you need info on this just post again, otherwise i would list your issue under the remote brand