The "picture remaining" number on the display panel does not decrease after you take a picture or record a message. Why?

Hello
To unlock the receiver from child lock, Press '/Power ON button on the recorder. The recorder turns OFF and ' CHILD LOCK' appear on the display. The timer indicator remains lit if there is a timer setting. The recorder will not workexcept for timer recordings.
To unlock the recorder, Hold Down '/Power button on the front panel of the recorder itself, until the "CHILD LOCK" display disappears from the front panel display.

Dear Amaxeen ,
Well It Seems the configuration problem ,you should have to configure your phone properly for that ,if you wanna to use its aal features you need to download proper drivers and manual ,so that you can use it smoothly.

You can download all stuff for your Sharp 903 , from this link:

http://www.sharp-phone.com/country/downloads/downloads.php?country=GB&lang=en&product=903

Cheerup and Be Happy Always

Hello you can erase the recorded messages one by one or all massages in folder at time

Note once a recording has been erased, you cannot retrieve it.

Erasing messages one by one

1 Press ERASE while playing back the massage you want to erase or press ERASE for more than 1 second during stop mode.

A beep will sound and the message number and "ERASE" will flash while the first and last 5 seconds of message is played back 10 times

2 Press ERASE while the message is being played back.

The message is erase and the remaining messages will be renumbered. (For example, if you erase Message 3. When erasing is completed, the unit will stop at beginning of the following message.)

Erasing all messages in a folder

1 Press FOLDER to select the folder you want to erase.

2 While pressing STOP, press ERASE for more than 1 second.

"ALL ERASE" will flash for 10 seconds

While the display is flashing, press ERASE.

r03 is NOT an error message. It indicates the number of remaining pictures that can be stored in the camera's built-in high speed memory buffer (before the camera will need to send them to the memory card). Each successive picture taken rapidly will decrease this r03 number by 1. Eventually the r01 will be on screen, and after that picture is taken, the camera will not shoot until the memory buffer has been transferred. This may take a few seconds, and then shooting can continue again.

try to delete some pictures, recordings and videos, sometimes the reason why it has a message like that is because the memory of your cp is already full

Had the same message on my display after spilling water on the cooktop. Obviously, the seal (rubber gasket) that prevents liquids getting inside the control area is not very good.

I replaced the Control (p/n: 10181439 / 9761799, 2 numbers, same part) and the flat cable between the touch keypad and the Control (9762781).

After turning the breaker back on, only had the message to set the clock.

You can add memory to your camera by purchasing an xd memory card.
Compatible cards
xD-Picture Card (16MB – 1GB)
There are two ways to record the pictures you take with this camera.
Recording pictures to the internal memory
• Pictures are recorded to the internal memory, and when the number of storable still
pictures reaches 0, you must connect the camera to a computer to download the
pictures, and then erase the pictures from the internal memory.
Using an xD-Picture Card (optional)
• Pictures are recorded to the card when inserted in the camera. When the card is
full, you download the pictures to a computer, and then either erase the pictures
from the card or use a new card.
• Pictures are not recorded to the internal memory when a card is inserted in the
camera. Pictures in the internal memory can be copied to the card using the
[BACKUP] function.
g“BACKUP Copying pictures in the internal memory to the card” (P.25)
“The card” (P.60)
Number of storable still pictures and recording length of movies
Still pictures
Movie
• If you use a non-Olympus card or a card used for another application, such as for
a computer, the message [CARD ERROR] is displayed. To use this card with this
camera, use the [FORMAT] function to format the card.
g“MEMORY FORMAT (FORMAT) Formatting the internal memory/card” (P.24)
Additional shooting tips and information
Increasing the number of pictures that can be taken
IMAGE QUALITY Image size
Number of storable still pictures
Internal memory Card (128 MB)
SHQ 2816 × 2112 2 25
HQ 2816 × 2112 6 76
SQ1 2048 × 1536 8 108
SQ2 640 × 480 60 726
IMAGE QUALITY Image size
Remaining recording time
Internal memory Card (128 MB)
HQ 320 × 240 (15 frames/sec.) 32 sec. 6 min. 37 sec.
SQ 160 × 120 (15 frames/sec.) 2 min. 8 sec. 26 min. 28 sec.

You can selectively clear information stored in your machine’s memory.
1. Press Setup on the control panel. The display shows the first menu;
FAX NUMBER/NAME.
2. Press ➛ or ❿ until ‘MEMORY CLEAR’ appears, then press
Start/Enter. The display shows the items you can choose to clear.
• FAX NUMBER/NAME : your fax number and name are cleared from
the machine’s memory.
• DIAL/SCHEDULE : clears the one-touch, speed dial, or group dial
numbers stored in the memory. In addition, all
the Schedule Job operations you have reserved
are also cancelled.
• JOURNAL : clears all records of transmissions & receptions.
• DEFAULT SETUP : restores all the option settings to factory default.

Only clear de Journal, don't clear the other.
Try this if it resolve the problem.

Hello, the special flat cable connecting LCD panel with main board is broken. If you want I can supply you with further info (part number, etc.) at LIVE Expert Assistance. Best regards, Arpi

The file size of a picture depends on the resolution you choose and the complexity of the scene. A picture of blue sky has a smaller file size than a picture of autumn leaves. If the Pictures Remaining number does not change when you take a picture, it generally means that the picture does not take up sufficient memory to decrease the number. This is normal. The number is not a count of consecutive pictures; it is counting available space - the approximate number of pictures remaining.