Fault code f26 - Maytag Washing Machines

Question 1

0answers

What does fault code F26 mean?

Be the first to answer Mar 24, 2016 • Fisher and Paykel Refrigerators

0answers

What does f26 mean for siemens washing machine

Be the first to answer Jan 03, 2016 • Siemens Washing Machines

1helpful

1answer

What means the code error F26?

F26 Boiling protection. The program is interrupted and the drain pump is operated. The display shows Technical fault F26. Call the Service Department. The buzzer is activated for 2 minutes.
Cause:
Temperature at NTC temperature sensor has exceeded 194?F (90C).
Remedy:
Check the heater relay and replace it if necessary.
Cause:
NTC temperature sensor providing inaccurate information.
Remedy:
Replace the NTC temperature sensor.
Cause:
Heater relay closed.
Remedy:
Replace the heater relay.

Aug 25, 2014 • Dishwashers

0helpful

1answer

F26 code

Unplug it and wait a while, the door may finally release the lock. Then google the problem to see what F26 is.

Nov 25, 2013 • Hotpoint Ultima WD72 Front Load...

0helpful

1answer

Whirlpool 3LCHW9100WQ Semi-Professional 9kg Washing Machine

Possible fault with the door switch or the control panel but you can try to open and close the door few times to reset after removing power.
click this link: error code F26

Oct 03, 2013 • Washing Machines

0helpful

1answer

My maytag commercial washer display a code F26

This error code indicates that the door needs to be opened and closed.
The F26 code may appear the first time you try to use the washer. Open and close the door to clear the display.
The F26 code may also appear if the washer has run three cycles without the door being opened. Open and close the door to clear the display.
If opening and closing the door does not remove the error display, press Pause/Off or Pause/Cancel twice.
If Pause/Off or Pause/Cancel does not work:

Unplug the washer or disconnect the power for one minute.
Plug in the washer or reconnect the power.
Re-select the cycle and press Start.

NOTE: If the error remains on the display, and the condition above has been checked, call for service.

Oct 23, 2012 • Washing Machines

1helpful

1answer

F26 (on an HE5t)

The error F26 does indicate a fault in the door switch circuit. See the image below for a complete listing of what can cause this error. There is a door unlock error that would display if the door is not locking or unlocking but the F26 means the control is not seeing the door switch open and close.

This is most likely a problem with the door switch or a loose connection at the switch.

Jan 16, 2011 • Washing Machines

9helpful

1answer

I have a refrigerator model RF-610 ADUX. What does Fault code F26 mean?

A bit late haha but fault code 26 is an ice maker motor fault. The icemaker gearbox is not returning to the start position an sends a signal to te controller :)

Oct 30, 2010 • Fisher and Paykel Refrigerators

2helpful

1answer

What does F26 mean

Hi, Well The error F26 does indicate a fault in the door switch circuit. There is a door unlock error that would display if the door is not locking or unlocking but the F26 means the control is not seeing the door switch open and close.This is most likely a problem with the door switch or a loose connection at the switch.
One thing to try first before scheduling service or replacing the part is to check the connections on the door switch.
You can unplug the washer first and remove the lower access panel and reach up to the door lock and try to feel for the connections and make sure they're tight.

Thanks! mannu_rakesh

Sep 11, 2009 • Washing Machines

1helpful

2answers

Bosch classixx 6 1200 express fault codes

go to http://www.repairclinic.com/0078.asp

Nov 29, 2008 • Washing Machines

Question 2

Richard Roth

Maytag Master 9,472 Answers
Posted on Jul 30, 2011

Richard Roth

Maytag Master

Joined: Nov 14, 2010

Answers

9472

Questions

2

Helped

2628690

Points

28464

This error code indicates that the door needs to be opened and closed.

The F26 code may appear the first time you try to use the washer. Open and close the door to clear the display.

The F26 code may also appear if the washer has run three cycles without the door being opened. Open and close the door to clear the display.

If opening and closing the door does not remove the error display, press Pause/Off or Pause/Cancel twice.

If Pause/Off or Pause/Cancel does not work:

Unplug the washer or disconnect the power for one minute.
Plug in the washer or reconnect the power.
Re-select the cycle and press Start.

Related Topics:

Trustworthy Expert Solutions

Fault code f26 - Maytag Washing Machines

1 Answer

Richard Roth

Add Your Answer

Attachments: Added items

Related Questions:

What does fault code F26 mean?

What does f26 mean for siemens washing machine

What means the code error F26?

F26 code

Whirlpool 3LCHW9100WQ Semi-Professional 9kg Washing Machine

My maytag commercial washer display a code F26

F26 (on an HE5t)

I have a refrigerator model RF-610 ADUX. What does Fault code F26 mean?

What does F26 mean

Bosch classixx 6 1200 express fault codes

Not finding what you are looking for?

Washing Machines

What does fault code F26 mean?

Ask a Question

Top Maytag Washing Machines Experts

ZJ Limited

Brad Brown

john h

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

MVW18PDAWW.pdf. user-manual-MVW18PDAWW...

Use and Care Guide -...

Use and Care Guide -...

Related Topics:

Trustworthy Expert Solutions

Fault code f26 - Maytag Washing Machines

1 Answer

Richard Roth

Add Your Answer

Attachments: Added items

Related Questions:

What does fault code F26 mean?

What does f26 mean for siemens washing machine

What means the code error F26?

F26 code

Whirlpool 3LCHW9100WQ Semi-Professional 9kg Washing Machine

My maytag commercial washer display a code F26

F26 (on an HE5t)

I have a refrigerator model RF-610 ADUX. What does Fault code F26 mean?

What does F26 mean

Bosch classixx 6 1200 express fault codes

Not finding what you are looking for?

Washing Machines

What does fault code F26 mean?

Ask a Question

Popular Questions

Washer leaking water from bottom

Maytag Neptune Error COde "nd"

Want to disengage lid lock on maytag centennial

Maytag 2000 series shows error code f6 e1. How can I fix?

Maytag maxima codes F06 and E02: Tried doing a spin/rinse/drain on an empty machine. Timer seems tpo be working but cannot hear water filling or barell spin. tried to shut off and door is now locked.

Top Maytag Washing Machines Experts

ZJ Limited

Brad Brown

john h

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

MVW18PDAWW.pdf. user-manual-MVW18PDAWW...

Use and Care Guide -...

Use and Care Guide -...