Connecting Epson TM U220D printer with Laptop (having Windows XP)

Hi Ali

The problem by doing this is that not all Parallel to USB cables work right out of the box with your equipment.

What you need to do first is make sure that your computer sees the device through the cable. Then when it prompts you for the drivers for the printer install the driver set (parallel) the connection should not matter at this point. However the step of the computer detecting the device first is very important.

I hope this helped.
Philipp

Please try this link..

http://cr.am/framed.php?url=http%3A%2F%2Fpos.epson.com%2Fdevelopers%2Findex.htm&ref=driverguide

Vista compatible present. try with this.. Specially windows 7 drivers are not present...

Hi

For the driver of epson tm-u220 n188a Click hear.

Please get it here : www.epson.co.id/epson/drivers/driver_download.htm
www.printcountry.com/drivers/EPSON_DRIVERS.asp
Jay lks

What is the baud rate of the EPSON TM-U220D MODEL M188D?

printer options - printing defaults - settings you have color print mode. Set it ti monchrome
Also at printer properties you have option to set the printer using only black cartridge.

Hi

option 1 - buy a pci parallel card

option2 - buy a cable serial 25 to usb the cost is $30 dlls

mau download driver epson tm-u220d ga ada...
klo mau cari dimana yah

You can connect it using a SERIAL NULL MODEM cable, You can download the driver from epsonexpert.com after you register they will send you username and password to login, go to technical resources and select printer model and download the APD304E driver

Hi, On the PC that will not display printer status correctly, pls run MSCONFIG (start, run, type "msconfig", OK); in the System Configuration Utility Window, click on the tab Startup, see if the EPSON Status Monitor is present and checked. If it is not present, check if you have Lavasoft Ad-Watch or similar program running. This prevents the EPSON Status Monitor from registering and running correctly. If such a program is running, temporarily remove Automatic setting and reinstall the EPSON Status Monitor. Accept any registry modification at this point. Restore all settings once installation is finished. If still a no go, try wiggling the parallel connector a bit and make sure it is snug and fit. If all else fails, you may have to consider: Installing to only 1 PC, share and make it a print server assuming you have networked all your PCs; or re-installing Windows (Ouch!) Hope things work out for you. Pls post again how things turn up. Kind regards.