Cant get my tv out of video 2 and i dont have the remote what do i do

TV Parts Universal TV Stands DLP Chips ShopJimmy This place might have an original remote control.

What is the Exact model number to your TV?

Hi clintonshue,

if you do not have the remote, try the buttons built in the TV and find the Menu button, from there you can enable the TV INPUTS, or buy a remote which is compatible with your current TV.

i hope this helps.

sony dt1300-c disney tv model. dont buy the new freakin disney remote for it because it's too expensive. here is the code for the tv. 039 it's a code for sony tv. just buy you a cheap universal remote and set it up.

You shouldn't need to sync it to your x-box.

By clicking on the TV button it will change from your TV to the XBox.

There are universal remotes for around $5.00 at Wal-Mart. You can program them to your TV very easily.

DE SEGURO TIENES ALGUN PROBLEMA

ok what channel is it on if it is an old tv put it on channel 3 if not try pressing input on your remote it will say "video 1" "video 2" then "front' then normal tv it should work on one of the settings

If you have the original remote, hit video, source, or input button, if it dont have them, then try to change the tv to channel 00 (zero or zerozero), if not then the channels might have to scroll to it, from channel 02 down to make it loop, if it goes to the next highest channel, then you need a remote. It may be set in the menu options to have the video source not saved to your list of saved channels. when you scan the channels, the tv might not look for the A/V source (audio / video), maybe just the RF source. The 3 DVD RCA wires are 1 video and 2 stereo, one stereo for left and one stereo for right. The TV has only 2 , 1 for video and 1 for mono 1 channel sound. This wouldnt have anything to do with why you cant use the DVD player. but try that with the original remote (or a universal remote that is set to your tv set that has either video, input, source or something similar. It is what tells the tv to change from the cable source (RF) and the AV source (the Red White and Yellow plugs, in your TV's case, 2 plugs, one yellow and the other either red or white or something). Dont really know how to explain it much more but hope it helps.

if you have a sky remote or know someone who does you could try programming it by using one of these codes, try them all one at a time

Sanyo 0159, 236, 073, 100, 064, 174, 185, 367, 039, 245, 246, 398, 241, 572, 583, 037, 132, 182, 244, 191