Jamo 50 froze then started but now no sound on any DVD we plat

You can replace DVD unit with one est?ndar for pc.

The only thing you must do is remove the front of the tray.

There are no official (or unofficial) universal remote codes for Jamo DVD players or any Jamo product.

The actual universal (and one-for-all) remotes are available, but there aren't any preset codes for this brand or model unit.

Might have got something to do with the powersuply, tjeck http://www.fixya.com/support/t3738600-receiver_doesnt_start . I am about to give it a go, I have a dvr 50, and my friend has got one aswell, and it is my belives the powersuply is creating all the noise, and your problem will probably only become worse.

there will be bad caps on the power supply pcb assy,change those capactors that have been bubbled,tops pushed outward, and it should work.

you have a defective power supply.there will be caps on power supply that will need to be changed,change the caps that looks like the tops are pushed out.unit should then work.

I have the same problem. I have been in contact with Jamo Denmakr and Norway. They are aware of the problem. There are two issues/answers:
1 If the DVD your're playing has scratches reading error accumulate and then audio sync problems occur. (My meaning is lo quality DVD drive). You might overcome this by reburning the divx file to a new disc to avoid read errors.
2 The DVD drive itself is defective and should be replaced. Warranty should cover this of course. I do receive my DMR-61 this week after DVD drive change. I hope this will fix it...but I don't believe so. Crossing my fingers.

Henning

had same problem told power supply unit is u/s £153 all in to fix it , gonna get new player , other probs telephone Telefringe 01373 462598. hope this helps someone.

Hi I have jamo Dvr50 system and it has been frozen since yesterday. I have power down few times but nothing is happening. It comes on and panel lights up but that is all.

It is probably the powersuply, tjeck http://www.fixya.com/support/t3738600-receiver_doesnt_start

I have the same frozen problem vith Jamo DRV-50.
But I found this:

www.leifline.com/reptips/DVD_DVD-VIDEO/DVD.htm 

Its a swedish site for electronic repearments, Jamo DVR-50 have problems with heat also and capacitors in the power suply unit goes burned. So the instructions are:

1.Simptoms:Various strange error

2.Solution: Replace the capacitors in the power supply, especially C30 470μF/ 10V, C31 2200μF/ 10V and C16 1000μF/ 10V.

My service guy already told me that some electrical parts in the power supply unit are burned, he replace them and succeded to powerOn the unit but still jamo have problems staying powered on and now im going to tell him to replace those capacitors C30, C31 and C16, and i hope this will work.