Farmville can not fully loading, it was happen almost from one week a go...always stop in around 99% then stuck for an hour even more....so, only less than 2% more left than it will be open...my computer has a latest Adobe flash player...and I have only less than 10 apps on my computer, so, .please help , thank you.

Bad door switch! If you look at the switches where the terminals come out of the switch body, you will probably see the plastic under the terminal coming out of the switch has melted, Maybe a bit of browning on the clear or whiteish insulator on the terminal,.you will need to repalce the bad switch and run better, larger wires to it to stop this from happening again. I use a higer amperage rated switch and I run nickel stranded high temp wire to it, with Commercial High temp terminals so it doesnt happen again.

Door ailment may be a issue or the brackets that hold the switches maybe old and moving. Or wrong switch in wrong spot..

It may be making noise, and the light comes on, and the turntable goes around, but I'll bet it's not actually cooking (although that CAN happen). Try putting a cup of water in the microwave when this happens and see if it gets warm. If it does NOT get warm, then you just have a bad door switch. If it DOES get warm, then you have a stuck relay on the control board, and the control board will have to be replaced.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Sounds like the scales have developed a leak across the battery and is draining the power. New scales maybe the best option but before that, have a look to see if there is any spilliage around the pcboard and/or battery terminals.

Always place the bag of popcorn on an upside-down paper plate.

This allows more microwaves to penetrate the bag from the bottom.

Also always place food of any kind in the microwave off-center on the tray, NOT in the middle of the tray.

Not only does it cook more evenly (think of how you stir liquid) but it also prevent the same spot from being heated repeatedly on the glass turntable, which can lead to overheating and breakage.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

In all likelihood the mangnetron has failed, or perhaps even something in the Power Supply and it is shutting down for safety reasons. You need to have it serviced by a reputable service centre/man. Ensure you get a firm "Quote" before proceeding, and remember these days the cost of repair can equal or exceed the price of a new one.

Sounds like issues with the mcroprocessor on the main timer board. Contact https://encompass.com/ to see if it is available

Are you using a 3 pronged outlet and is it grounded? If you have a 2 holed outlet and are using a ground eliminator adapter, try turning the plug around to reverse the polarity. If this helps, then it would be advisable to have an electrician to ground your oven.

the thermal switch button is bad ,stuck on
its normally located in the back around the fan or klystron tube
it has 2 connectors and looks like a large button.