My mouse lock button is orange when i press it it doesnt turn blue.... i cant even type anything, the only buttons that work is my power button and the volume touch keys.... i have tried turning it off and waiting awhile, even when i try to pick and option on the screen when it restarting i cant because the KEYS dont work! please help

Unplug the computer and take out the battery.
Hold the power button for ten seconds.
Leave the battery out and plug in the power cord.
Press the power button.
If the computer turns on, put the battery and everything should now work.
This has solved every "laptop not turning on problem" for me and my friends.
sublimedjg

there is a button just above the track-pad (mouse controller) that normally only dissables the mouse but it might work for this too.

Hi,

Try pressing the button above the touchpad to make the light blue, that should re-enable the touchpad again.



Regards.

Remove the power chord. Remove the battery. Remove all the external peripherals. Press and hold the power button for 15 seconds. Put the battery back in. Turn on the laptop.
It should work fine now.

if not turn the laptop upside down then slap it lightly 3-4 times
this will then surely fix the problem and if not then take it to the service center.

Turn off Number Lock

Press FN key which is blue and then pres the button where numlock is also written in blue
It will disable num-lock
Most people turn on num lock when using external keyboard but useless on a normal laptop

if there is a light above the touchpad it should be blue if it is orange it is turned off push the button by the light it will go blue and the mouse will work.

hi
your track-pad mouse has a horizontal bar-shaped button above it with an orange light next to it, try pressing that button. The light should turn white and your mouse should begin working again.

Disconnect all the devices from the computer(tower) including keyboard, mouse, monitor(everything)..even the power cable

Now keep on holding down the power button on the computer tower for 15-30 seconds..

Now release the power button, plug in the power cable, monitor, keyboard, mouse and turn on the computer...

If it works, great!!!

Otherwise, take it for repair..

Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it to Reset/Connect the mouse to the receiver and work properly.
If not, try pressing the receiver button and then press the mouse. This should be done whenever you change batteries or glitch.
Hope this helps you. Bud

there's a problem with you mechanical alignment or try this resetting...

Service mode operation procedures -
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection