Fridge is making a beeping sound. The digital indicator for fridge area is saying Hi

You will probably find there is a setting on the control pane.
Not knowing the model, I would look in your user manual for the answer.

The ActiveSmart system that manages the fridge will beep when there is fault, and the amount of beeps will indicate the fault code.

To understand the fault code, a technician would also need to know the version of activesmart, and the product ID on the grey label on the bottom right of the fridge.

Fridge keeps beeping or buzzing: The following is for Frigidaire models but others can be addressed similarly.

Several Frigidaire refrigerator models have an electronic control panel on the freezer door the owner can use to adjust the internal temperature, dispense ice and water and receive notification about issues such as the need to replace a water filter. The refrigerators also emit a beep for various actions and as an occasional alarm. Determining what causes the beeps necessitates some troubleshooting.
Temperature Controls ·A Frigidaire refrigerator's display panel blinks when the control panel is touched to set temperature controls. After pressing "Freezer Temp" or "Refrigerator Temp" on the keypad, press the arrow buttons within five seconds to increase or decrease the desired temperature. If you do not press the arrow buttons within five seconds after pressing "Freezer Temp" or "Refrigerator Temp" on the keypad, the refrigerator beeps to indicate the current setting will stay in place.

Door Open ·When you leave the refrigerator or freezer door open, the refrigerator beeps. Also, the "Door Ajar" indicator illuminates on the appliance's display panel. Shutting the door and pressing "Alarm Reset" stops the beeping and turns off the "Door Ajar" indicator light.
·The Frigidaire refrigerator has a control lock feature that prevents use of its control panel or dispensers when the unit is locked. When the control lock is active, a beep sounds when a keypad or dispenser is pressed. Release the control lock by pressing the "Control Lock" icon for three seconds. A beep will sound, and the icon's light will go out.
Power Reset ·A power reset is occasionally necessary if the Frigidaire refrigerator's control panel does not work normally or a reset function on the keypad does not work. A power reset involves disconnecting power to the refrigerator by unplugging its power cord from the electrical outlet, waiting 30 seconds and plugging the power cord back into the electrical outlet. When the control panel resets, a beep sounds. If the refrigerator beeps even after a power reset and the beeps' source is not known, contact Frigidaire.


Read more :http://www.ehow.com/info_12148688_cause-beeping-noise-frigidaire-refrigerator.
Cause of Beeping Noise in Frigidaire Refrigerator eHow

Hi Christine.

When your F&P beeps, it's indicating a fault code - count the beeps which will relate to a fault code. 17 beeps would indicate an issue with the freezer fan.

Could be the reed switch (door switch).. amount of beeps will indicate the fault code.

Hi,

Checkout this tip about digital camera error messages


Lens Errorfix for Digital Camera

heatman101=-=-
=-

Hi from retired Englishman in SW France,

Sorry, it would be better if you re-post this onto the fridge/freezer forum- this is for washing machines so you might not get an answer- other than this one ;-0)
Good luck,
John C
PS sounds like the temperature sensor might be misbehaving like ours did - but take no notice of me!

Try these procedures.

Sounds like it is working order.

A single beep should mean that a picture was taken, but the display should change from 26 to 25 indicating that one less position is available.

Apparently a double-beep would mean that sufficient light is not available to take a picture, so a picture is not taken. Could this be what is happening to you?

My comments are based on pages 14, 15, 16 of the User Manual, which I downloaded from:

http://safemanuals.com/user-guide-instructions-owner-manual/VIVITAR/VIVICAM%203350-_E

There are some other indicators in the display area that might give you a clue to the problem.

Hope that helps. Best of luck with your camera.

hi my kenmore stainless steel black top keeps making a beeping sound and says F11