HP PSC 1315 All-In-One InkJet Printer Logo

Related Topics:

Posted on Oct 13, 2017

My printer hp psc 1315 stops in the middle of printing cd labels or anything thicker than regular bond paper. It prints the design perfectly on regular bond paper. I already set the PAPER TYPE to PHOTO and SPECIALTY PAPER but it still does the same thing... It stops either at the beginning or in the middle or printing.How do I fix this? thanks...

1 Answer

Stuart Dalton

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 8 Answers
  • Posted on Oct 13, 2017
Stuart Dalton
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Nov 14, 2008
Answers
8
Questions
0
Helped
3374
Points
25

It's not a printing problem ' it's your networking' try using the cable provided with your printer via usb' if it prints ok' then you need to reconfigure your printer settings' updates or clean re install.

5 Related Answers

JULIANFIX

ALBERT GARCIA

  • 975 Answers
  • Posted on Apr 18, 2008

SOURCE: hp psc 1315 driver

Heres the link , hope it helps , just click
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=374568&lc=en&cc=us&dlc=en&submit.y=5&submit.x=3&lang=en&cc=us

Ad
iqbal_del

Iqbal Husain

  • 655 Answers
  • Posted on Apr 21, 2008

SOURCE: hp psc 1315 driver

temu,
Click here to get free driver and software from HP

  • Select your OS and make download...and... be...:))

Thanks
Iqbal

Anonymous

  • 3422 Answers
  • Posted on Jun 18, 2008

SOURCE: hp psc 1315 paper jam

Hi,



. Switch off the printer and disconnect the power supply. Allow any residual charge inside the all-in-one printer to dissipate before putting your hands or any metal tools inside the chassis.

2.
Pin down the exact location of the jam. The 3 hot spots for a jam are before a sheet completely leaves the paper tray, anywhere between the feed tray and print carriage or between the print carriage and output tray.

3.
Take off the front paper tray if the sheet jammed while still in the front area of the printer. If here, you should be able to see most of the paper.

4.
Pull the sheet with both hands and steady pressure. Do not tug as you might rip the paper, leaving a piece deeper inside the machine.

5.
Open the back panel to reach paper jammed between the feed-tray area and print carriage. Carefully remove the jammed paper.

6.
Use the carriage access door to get at a jam further inside the printer. You may need to remove the print carriage to get to the jam.

7.
Replace all parts and return any access panels to their closed and locked positions. Plug your printer back in and flip the power switch.

Anonymous

  • 1 Answer
  • Posted on Dec 15, 2008

SOURCE: My HP PSC 1315 printer

printer will not power up!

Joed911

JDTec

  • 4338 Answers
  • Posted on Jun 06, 2009

SOURCE: scan from hp psc 1315 to Mac OSX

first remove the printers folder,then the drivers manually one by one from the receipts folder,then remove the hp software. Deselect the hp in the printer preferences and then install the hp software again. And then it should work. Check in the printer preferences for your printer, If the hp fax is in there. Remove it and select the printer and thats it.

1.printers folder is located on the hard drive-library-printers
2.reiceipts folder is located same-library-reiceipts
3.Download the software from hp website.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My hp 1315 check paper is blinking

un clip the back door there might b a jam of paper that u cant see but printer can detect once u have done that u must !! pres enter 2 reset it after u have replaced the rear door of course
0helpful
1answer

My hp 1315 printer is not showing anything on paper...

make sure that your ink cartridges are in correctly...you may have to push the cartridges in becasue mine are really stiff when trying to get them in or out...once it is happy it will print off a test page to show that it prints
0helpful
1answer

Alignment sheet prints---cannot print anything else

u will have to first scan the alignment paper in your scanner this will solve your problem
2helpful
1answer

Hp psc 1315 paper jam

Hi,



. Switch off the printer and disconnect the power supply. Allow any residual charge inside the all-in-one printer to dissipate before putting your hands or any metal tools inside the chassis.

2.
Pin down the exact location of the jam. The 3 hot spots for a jam are before a sheet completely leaves the paper tray, anywhere between the feed tray and print carriage or between the print carriage and output tray.

3.
Take off the front paper tray if the sheet jammed while still in the front area of the printer. If here, you should be able to see most of the paper.

4.
Pull the sheet with both hands and steady pressure. Do not tug as you might rip the paper, leaving a piece deeper inside the machine.

5.
Open the back panel to reach paper jammed between the feed-tray area and print carriage. Carefully remove the jammed paper.

6.
Use the carriage access door to get at a jam further inside the printer. You may need to remove the print carriage to get to the jam.

7.
Replace all parts and return any access panels to their closed and locked positions. Plug your printer back in and flip the power switch.
0helpful
1answer

Hp psc 1315 paper jam

my printer no function cant print
0helpful
1answer
0helpful
1answer

HP psc 1315 all in one-printing cards

Make sure you check the settings in the print driver. Sounds like your paper size settings do not match the size of the paper that you are printing onto and you are actually getting a false jam because the machine is seeing a different size paper then you ahve in it.
0helpful
1answer

Only printing partial page

hp psc 1315 printer dead due to lighting send me circuit drawnig
0helpful
1answer

Unable to print

The problems is not the cd for installed and my printer psc 1315 no instaled. Because the computer is repared.
Not finding what you are looking for?

232 views

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6687 Answers

k24674

Level 3 Expert

8093 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...