Hi, one of the half doors of my Beverage Center Wine Cooler Model # HDBC36ID broke and I need a replacement door. I would like to know if i can still purchase this part from this company. Please email me your response or call me at (718)-843-4965. Thank You very much.

Everstar Beverage Wine Cooler HDBC36ID not cooling

Ouch ... prior fixya thread on this model paints a pretty bad reliability picture...

What did you need to know? If it fell out it just pushes back in. Press it in with your thumbs. If you want to replace it its very easy to change. Just pull out the old one and put the new one against the door and push it back into the tracks.

try there for parts enter model http://www.searspartsdirect.com/partsdirect/part-model/Danby-Parts/Wine-beverage-cooler-Parts/Model-DWC612BLP/3055/0169000?pathTaken=&prst=0&shdMod=DWC612BLP

Do you still have your Franklin HDWC35 wine cooler?

Maybe a indicator of greater problems having been left that way.

Hi There,
I was able to find two 18 bottle wine coolers on the Haier site.

The first is model number HVTM18DABB
http://www.haieramerica.com/wine-beer-beverage/wine-cellars/hvtm18dabb

The second is model number HVTSM18DABB
http://www.haieramerica.com/wine-beer-beverage/wine-cellars/hvtsm18dabb

On either product page the manual can be downloaded from the "product support & downloads" tab

Have a great day!

You will need Adobe Acrobat Reader to view these documents. The Adobe Acrobat Reader is available as a free download. Get Adobe Acrobat Reader Click Here=> KUWA244PBS Parts List
and here=> KUWA244PBS User and Care Guide
If you should need the service manual you will need to cant me here=> HERE Reason is Whirlpool does not allow me to publish the SM here.

The beverage center and wine cellars have a temperature display for each zone. 12 volts

AC is supplied to the display board from a transformer in the unit compartment. The displays are only temperature displays and have nothing to do with any cooling function. A thermistor is used to sense temperature for each zone. The thermistor for the bottom zone is located inside the lower portion of the separator. The thermistor for the top zone on the wine cellar, (mid zone on beverage

center), is located in the upper portion of the separator. The thermistor for the beverage center upper zone is located on the inside of the 2-piece evaporator cover. It is on the right-hand side.

The mid temperature for the bottom zones on either unit are 60? Fahrenheit plus or minus 5 degrees. The mid temperature for the mid zone on the beverage center and the top zone

on the wine cellar is 45? Fahrenheit plus or minus 5 degrees. The mid temperature for the

top zone on the beverage center is 38? Fahrenheit plus or minus 5 degrees. I think at tis time you should check each section with a pocket size digital thermometer to cofirm tha the mechanical thermostat is within calibration. Click Here=> 4344690 Temperature Control

Click here for a=> KUWA244PBS Beverage Center Wiring Diagram
I believe the problem may be in the PCB transformer shown at the bottom right corner of the wiring diagram. It is possible o change the transformer but I have not been able to find the board that powers the LED temperature readouts. If needed let me know and I will call Whirlpool mfor you, Thanks, Sea Breeze

Mine is 11 months old - pooling water on right (which is theside i keep colder for beer/soda/water), also my glass door on right has water between panes, I just called franklin (everstar) and they say a service guy will call in 5 days... I hope.

Did you get help and are you 'happy' with the service done?

Remove the doors, then the evaporator cover. Just be careful.