Netopia router and belkin card compatability

This link should assist you:
How to Configure a Motorola / Netopia 3347 DSL modem

Hi Good Day,

You can not use netopia model TER/GUSB2-N USB wireless card on your XBOX 360 due to compatibility issue's, Microsoft design XBOX to use only it's own wireless networking adoptor.

Not true. Any wireless b/g adapter will work -- and that's only if you need wireless, i.e., the router has 6 or 7 wired ports, also.
Further, I'm having a problem finding software that'll work with the Netopia device under Ubuntu (that's what I'm doing here :-)

Hi Larisa,

What particularly in the MTU settings needs to be changed?

Can you post the exact message it is giving you?

Thank you,

Lyzmorato
Fixya Premium Expert

There are some things you might try.

The Belkin card will come with third party software you can disable this utility by right clicking on the icon in the Taskbar and choosing "Use Windows Zero Configuration".

Then you will need to go into Control Panel >> Administrative Tools >> Services >> Wireless Zero Configuration >> Right click and check that the service is starting automatically >> click on Start >> Apply - that should then detect your wireless network and the internet.

You mean what program? Telnet. Here's the quick setup. If it's already been installed and password protected, you'll need to grab the installation guide somewhere else.

http://www.netopia.com/support/hardware/manuals/3347W-ENT_qsg.pdf

Carl

ok heres the solution.
goto start,control panel,performance and maintainance,administrative tools,services.
Scroll down to bottom to WIRELESS ZERO CONFIG,double click and click start.
now exit and wait a minute and your limited or no connectivity should change to connected,
let me know if this helps,
Patrick.

Are you talking about your wireless pass key, if nessesary connect a PC directly to your Netopia and reset the pass phrase through the routers control panel/gui, remember you will need to reset all pc conections to the new phrase. If you haven't made any IP changes to the netopia, the default settings are likely to be 192.168.1.254, just use your explorer to browse to this address

Hi ServiTiendas

To resolve this issue you have to set DHCP client to automatic

Take a look here: http://www.netopia.com/support/hardware/technotes/CQG_027.html