How 2 use a jabra bt 250v no manual available

default bluetooth passcode is 0000

It should have come with a small 45 mm diameter cradle base unit which the mains has a 1.4 mm jack plug plugs in and the headset rests in.
Look for it on Jabra support website or pictures on a search on Ebay
Search on Ebay for one for a replacement.

Check that both devices are in pairing mode and the phone lets the headset connect without asking for authorization.

There might also be a security / firewall issue. You might want to check your phone settings...

http://www.fixya.com/support/t190081-jabra_bt250v_indicator_light_doesnt check post 4

Typical non use problem answer is on this site use this link

http://www.fixya.com/support/t190081-jabra_bt250v_indicator_light_doesnt

nokia 6276

Cannot get my Jabra BT 250v to work with my Blackberry Curve 8310. Phone indicates I am paired, but there is no audio through earpiece. You can still hear audio through phone. Help.

u sould push the jabra buton until is blinkin red and green and go to
settings>bluetooth>search audio enhanc u sould see the jabra then u will be asked for a password type the password that u received with your jabra

Try this link to help you on this site it is a battery problem

http://www.fixya.com/support/t190081-jabra_bt250v_indicator_light_doesnt

Had the same problem with the BT250v 'connected' to my Nokia 6021. When connected to my notebook, the 250 did produce sound, so decided the Nokia was the problem. Fixed the problem by doing a full reboot of the phone like this:

 

Jabra: Turn off the 250

Phone: Delete the BT connection to the Jabra (in BT settings)

Phone: Switch off BT

Phone: Turned off the phone (I've even removed the battery)

Phone: Turned on the phone

Phone: Switch on BT

Jabra: Turn on the 250 for detection

Phone: Look for audio devices

Phone: Connect to Jabra

 

Problem fixed!