My phone is fine with every thing i can receive calls but the problem is touch pad not working it has lights glowing up when i open the slid and that is the only way to answer a call from my cell phone i have about 74 messages pending to be opened on the screen pls let me know a solution
ritesh
(india)
SOURCE: LG VX8600 SCREEN WENT BLANK, PLZ HELP!!!
m8 sounds like your screen is faulty or your ribbon has been damaged in some way.to fix it you will need to open it and have a look at the ribbon if there is any damage vissible no matter how small it means ur ribbon is gone an you need a new 1.it could also be your screen if there isnt any damage on the ribbon then it could be the screen.it could be a combination of both. word of caution: if you try to open it yourself you could damage the ribbon.you wont notice it but its very easy to do.so be carefull. but if you want an expert to do it for try these guys http://www.mobilephoneservicecentre.co.uk/ good luck
SOURCE: LG Secret touch screen, can not use left upper,
I have the same problem sometimes, when it happen I press the touch media key in the middle right side of the phone, and enter to the pictures aplication and exit touching the screen, this appear to recalibrate the touch pad most of the times.
SOURCE: LG Xenon keypad slid open will not turn horizontal on the screen
I read that you can rub a magnet on the backside of the slider and it makes the screen turn portrait and horizontal - you can see that when you rub the magnet on the backside. I just rubbed the magnet with the slider open on the horizontal side (only the right side) - if you rub the left side it makes it portrait. I did that a few times and my phone turns horizontal now when I open the keypad slider. It appears to have worked doing this at this point.
SOURCE: LG Rumor cell phone. Screen is blank or an array
The problem has nothing to do with the firmware, it is an issue with a cable in the phone. This cable connects the motherboard to the keyboard. When the phone is slide back and forth is causes the image to blur, get lines down the middle, or white out completely. Depending on your carrier, they should be able to:
Unscrew the phone, opening the phone up revealing the motherboard
Unscrew the motherboard
Pry the motherboard from the phone (on the other side of the motherboard there is a cable attached to it, you need to get that cable replaced)
and it's FIXED!
186 views
Usually answered in minutes!
×