Channell lock All channels on my TV are locked. How can I unlock them without knowing the 4 digit code?

Hi, I don't actually know how to unlock your specific TV. But here is a basic guide to unlock your tv.

1)Turn on the TV and grab the remote.
2)Look at the screen. If you see a blank screen with a red key on the bottom of the screen, press 'Function' and 'Mute' at the same time. This should unlock the channel. This should unlock the channel. This is an option for people who want the TV to stay locked out, want to be able to bypass the lock to watch a certain show or channel. All others channels will remain locked and the TV will fully lock when it is turned off.
3)Unlock all of the channels on the TV by entering the factory reset code. There are 3 main reset codes that TV Manufacturers set. These are 0711, 6688 and 3308. Try each one until you find the one that works. This will factory reset the TV.
4)Call the technical support service number in your owners manual if none of those codes work. A technician can help you troubleshoot the television because the problem may not be the locking control. When you call, make sure you have the model number and the serial number.
5)Or take it to a TV repair shop.

How to Unlock TV eHow

Press the "Menu" button to set the lock code for your JVC TV. A padlock icon will appear on the menu display.

Press "Zero" to access the lock code function then use the left and right arrows to select the four-digit number for your code. Use the up and down arrows to move to the next area of the display.

Select the up or down arrow to finish your lock code then use the left or right arrow to save your lock code settings and exit the menu. You can return to this display if you forget your four-digit lock code and set another code.

Write your four-digit lock code down and keep it in a safe, private area.

Select the locked TV channel you desire to watch or want to unlock. A message will appear on the display requesting you to enter your lock code to unlock the channel.
Unlock your JVC TV by entering your lock code on the 10-key pad. The message "Invalid Lock Code!" will appear on the screen if you enter the wrong lock code.

1. Press the Mode button until the LOCK CODE display appears.
2. Enter the 4-digit code using the CHANNEL SELECTOR buttons.
3. Press the CANCEL button to cancel the previously locked channel. The LOCK CODE number display flashes.
4. To exit the CHANNEL LOCK mode, press the MODE button until only the Time and Channel display appear.

Secret text if the code is forgotten!
1. Press the Mode button until the LOCK CODE display appears.
2. Press Channel Number "9" and "QV" simultaneously. Knowledge of this procedure defeats the channel lock system.

is it a cable channel that is locked or a normal TV channel ??

if its the cable channel, you can always call your cable company and have them give you the unlocked code...

if its the TV channel... what make/model is your TV ?

I need a code to unlock my TV its a VS-5004R mitsubishi TV?

The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in and try again.

Otherwise, the manual should address any lock function if it exists.

Hi,
i am imran
and i have also buy sanyo tv kit 360 ch fit in my old bpl 20"tv and i know for unlock tv channel.
try this this code definetly is solve your problem.
1st go to the locked channel.
and then press menu>system>child lock
and then press and hold down tv/av key and press swap key.
and see locked channel is unlock.
i have coming soon post for service code menu in short coming days.
please reply me to [email protected]

The Digital Channels are Blocked and Some of the Annalog Channels are Blocked that you can't access some channels and how do you unblock the channels by getting rid of the Code for Parental control?How Do you get rid of the Parental Code to acess all Channels .

Without the code, you must get an original remote and press the "QV" and the "9" buttons together to unlock the TV.