I dropped my 7310XL Norelco, and it came apart. It looks like everything is here, and I can get it back together, but the heads don't spin. Is there a diagram to make sure I am putting it back together correctly? Jim

Replacements for model 7310XL can be found at shaveroutlet.com
Norelco Philips HQ8 Spectra Sensotec Precision Replacement Heads

Series 9000 blades can be found at shaveroutlet.com gere
Philips Norelco SH90 Series 9000 Replacement Head

Norelco HQ6 Replacement Heads for philips norelco 7885xl, 7864xl, 7865xl, 7845xl, 7825xl, 7815xl, 6891xl, 6890xl, 6887xl, 6886xl, 6885xl, 6867xl, 6866xl, 6865xl, 6848xl, 6846xl, 6829xl, 6828xl, 6826xl.

Norelco HQ8 replacement heads for philips norelco 7110x, 7115xl, 7120xl, 7140xl, 7145xl, 7180xl, 7183xl, 7240xl, 7260xl, 7310xl, 7315xl, 7325xl, 7340xl, 7345xl, 7350xl, 7380xl, 7735x, 7737x, 7745x, 7775x, 7800xl, 7810xl, 7812xl, 8821xl, 8825xl, 8831xl, 8845xl, 8846xl, 8865xl, 8867xl, 8880xl, 8881xl, 8883xl, 8890xl, 8891xl, 8892xl, 8894xl, 8895xl, at810, at830, at880, pt720, pt724, pt730.

You will find an installation video at shaveroutlet.com. See link below and scroll down for video

http://shaveroutlet.com/shaver-replacement-parts/norelco-philips-hq8-spectra-sensotec-replacement-heads-p-251.html

If the reason that yours will not go together is because of broken parts, you will find replacements for model 7310XL at the link below

http://shaveroutlet.com/catalogsearch/result/?q=7310xl

Wife cleaned bathroom shelf dropping the Arcitec. One of 3 heads was not aligned properly, when I tried to re-seat it, this head came apart. To put it back together takes some finesse and patience. Take a coil of stamps, or some other small opening to rest the outer plastic shell head, then insert the metal screen which has notches (2 small, 1 large) and fit it in the plastic shell head. Next put the metal blade assembly on the screen. Next align this on the metal (thin) pivot. When the outer plastic head, and the metal pivot are aligned (small peg holes), you can place the thin inner plastic piece on and gently press your sub assembly and the backing plastic together, It will snap together and hold. Don't FORCE it, the holes must be aligned on the outer plastic, the metal pivot frame, with blades resting on the screen. It does snap together. Work with fairly bright light to see what you are doing. If this fails, invest in a new head assembly for about 15% of the cost of the whole razor.

See tutorial video on this at shaveroutlet.com. See link below and scroll down for video

http://shaveroutlet.com/shaver-replacement-parts/norelco-philips-hq9-replacement-heads-p-252.html

You will find a video deom at shaveroutlet.com. Click on the link below and scroll down for video

http://shaveroutlet.com/shaver-replacement-parts/norelco-philips-hq9-replacement-heads-p-252.html

You will find these at shaveroutlet.com. See link below

http://shaveroutlet.com/shaver-replacement-parts/norelco-philips-hq8-spectra-sensotec-replacement-heads-p-251.html

you will find a tutorial video at shaveroutlet.com. To view, click on the link below and scroll down to video

http://shaveroutlet.com/shaver-replacement-parts/norelco-philips-hq6-quadra-action-replacement-heads-p-250.html

It sounds like maybe one of the blades is damaged and it is jamming the whole thing. Try taking apart the head assembly and then insert each head one by one turning the shaver on in between each one. This should identify if one is damaged and causing the problem

If you require new heads, you will find them at shaveroutlet.com. See link below

http://shaveroutlet.com/norelco-philips-hq8-spectra-sensotec-replacement-heads-p-251.html