At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
close the pip window first if your tv/video button on your remote brings up an input selection menu either press the number of the ones you want or use the chan^chanv buttons to select
I have two excellent video links to share with you (as there are two schools on this; depending on your setup). After watching them both, you should be able to perform this repair yourself. Once you successfully do one, you'll be a pro. Just do not let that recoil spring come out on your or you'll be in a world of "you know what". Video1: http://www.youtube.com/watch?v=GyjQir3b3xI Video2: http://www.youtube.com/watch?v=i3ZMVFi0yqY Best of luck to you. James
Well first if you don't have a factory remote you will have to purchase a universal remote that supports i'll products program using factory codes or do a manual search( which takes a little time but I have had better luck with for more functions ) after programming you press tv/vcr button in which it should display ant. vIDEO1 video 2 and component repress button until desired chann
el is highlighted coincideing with whatever location you have your device connected rear is video 1 and multicolor is component and front is video2
for video, 3ways and any of this should work.
Step1, video out of dvd to video in on top at video1 section on tv. or
Step2, svideo out of dvd to svideo in at video1 section on tv. or
Step3. using component video
DVD unit component video out to TV unit component video in at video2
Y to Y input of TV
Pb to Pb input of TV
Pr to Pr input of TV
for audio, connect left/right audio of dvd to left/right input of tv. Input section of TV is in the middle. on tv back panel from left to right is antenna input, IN section - this is it, use this for all your connections.
let us know if you have any issues. thanks.
1. Plug in DVD player 2. Plug in VIDEO cable to back of DVD player There are multiple video out cable options: HDMI, VGA, RCA If you aren't sure, use RCA (red, white, yellow tri-plug cable) and plug yellow into VIDEO OUT port. 3. Plug other end of video cable into TV's VIDEO IN port. 4. Turn on TV to the INPUT channel that corresponds with the input port you plugged the video cable into. Usually, this is either VIDEO1, VIDEO2, INPUT1, INPUT2, or channel 3.
Make sure you have an input Video signal on that Yamaha Reciever (exa. DVD, Cable box, etc...) then choose the right input selection on ur receiver (Video1, Video2, AUX, etc..), then connect ur TV on the receiver Monitor Video out. And put your TV on the right VIDEO input too (Video1, Video2, AUX, etc..). Goodluck
Why, it is very easy. Just go to Menu manually (as u already did) and select 'Input'. Th eOptions Video1, Video2 and Tuner will scroll up one by one.
Just select Tuner
×