Sky remote code for sharp lc32-ct2e - Televison & Video

This is the sky code for your TV: Sharp 0093

000 Try that

Isis is a sharp tv in disguise, code is 0093 (sharp) the 4th option worked for me

Hi there. I hope you will see this reply. I bought one of these TV's yesterday and I've got the code from my dad's website www.satcure.net

If your remote is Version 6 then you will be able to follow the help on the sky box under
Interactive
Customer service
Program Remote

Then follow the steps using code 1221

If you have a Revolution 8 remote then you will have an easier job but with a 3 digit code.

3 digit code is 253

TO PROGRAM THE remote USING THE 3 DIGIT CODE:
1. Turn on the TV receiver
2. Press TV on the Sky Remote Control
3. Hold down SELECT and the RED buttons together for approximately two seconds, until the RED LED on the Sky remote blinks twice.
4. Enter three digit code from list for the receiver (early versions now flash twice).
5. Press select to enter code structure (the LED will flash twice if a valid code has been entered).
6. Now press the STDBY button and test other functions.

Hope this helps/works!

I tried the codes for other Sharp TV models. 0846 and 1221 both work.

On the Sky remote Press the Following.

TV,
RED + SELECT (blinks twice)
TV,
0093

try the VOLUME if this does not work. Press TV then VOLUME again repeat until Volume works.

Once the volume works press SELECT on the remote to store.

Hope this helps

Little Dish Fitter

please follow the steps below:

TV
RED + SELECT
TV
0093

try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.

cheers

Little Dish Fitter

SHARP TV

follow the steps below

TV
RED + SELECT
TV
0093 (sharp code)

press the power button if this turns your TV off then press SELECT to save. If not press TV then POWER. repeat this step until it does turn your tv off remember to press the SELECT button to save the code.

Cheers

Little Dish Fitter

I have used 1221 for my LC-32X20E and all functions of remote control works fine

You need code 1221 for this tv. I have the same tv, and using a rev.6 Sky+ remote, everything seems to work fine with that code.

As Sky seem completely unaware of this television, and possibly countless others, people should use the following site for a more complete remote control list than Sky themselves have:

http://sky.uebv.com/