At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
need the model number to assist but it sounds like a main board issue if you have one of the panasonic plasma models that have the inputs all on the main board. You can get main boards for most models at www.tvrepairworld.com
The best and sureshot way of obtaining the correct one is by part number that is printed on the board itself. If you can just remove the back cover and let me know the same I will find you a replacement in a jiffy! If you are not able to figure out which of them is the part number get me all the numbers(there should be only 3 of them, part number, serial number and board number) and I will figure it out and get you the link to the replacement board.
Not with this little information, but there are several reasons too look at. Plazma tvs use several boards to creat a picture, these are the x and y sustainers and a buffer board. There is also a main power supply that creates a lot of heat and these tend to go bad also. The set could have some how lost the gas charge in the display but thats unusuall. Most likely the sustainer boards need replaced and these aren't expensive but I don't want you to just throw money at it. Get someone to diagnose the set before you replace any boards. I wouls also caution you to not spend too much because you can get real nice LED tvs for a fraction of the cost of the plazma and plazma is on the way out.
Power supply board is dead.Replaced the power supply board will solved this problems.Tries Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.
×